ECX-H25BN-27.000

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.051" (1.30mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	40mA
Operating Temperature:	-40°C ~ 85°C
Series:	ECSpressCON™ ECX-H
Voltage - Supply:	2.5V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	27MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of ECX-H25BN-27.000

ECX-H25BN-27.000 is a crystal oscillator for general-purpose applications. It was designed to operate in the frequency range of 16.385~27.000MHz and provides excellent frequency stability over temperature, supply and load variations. The device has a typical frequency tolerance of ±100ppm and a typical aging rate of ±100ppm over the operating temperature range.

Oscillators of ECX-H25BN-27.000

The oscillator is divided into two types according to the output waveform, a sine wave (ECX-S) and a square wave (ECX-H). ECX-H25BN-27.000 is a square wave oscillator, which is a clock oscillator that produces a digital signal at the output port. Using the ECX-H25BN-27.000, the external circuit can be used to generate regular clock pulses, whose interruptions are used for synchronization, such as the firing of a NAND gate.

Application Field of ECX-H25BN-27.000

The ECX-H25BN-27.000 crystal oscillator can be used in a variety of applications. It is commonly used in low power applications such as frequency synthesis, frequency hopping, mobile communications, remote sensing, aerospace, medical and industrial control systems. This crystal oscillator offers a variety of advantages, such as low-power consumption, high frequency stability and low heat dissipation.

Working Principle of ECX-H25BN-27.000

The ECX-H25BN-27.000 crystal oscillator utilizes a piezoelectric transducer to convert mechanical vibration into an electrical signal. The oscillator consists of a quartz crystal and two compact circuit boards that mount on each side of the crystal. The circuit boards contain the components necessary to generate the oscillator\'s output signal. The quartz crystal contains a thin slice of quartz that vibrates at a frequency determined by its physical dimensions. The frequency is determined by the dimensions of the quartz, the thickness of the quartz and the cut of the quartz.When the oscillator is energized, the quartz crystal vibrates at its resonant frequency, allowing a signal to pass through the crystal circuit. This signal is then amplified and converted into a square wave. The output of the oscillator can be used to generate a digital square wave signal which can be used for timekeeping or data transfer.

Conclusion

The ECX-H25BN-27.000 crystal oscillator is a reliable, low power oscillator that can be used in a variety of applications. Its compact design and high frequency stability make it an ideal choice for general-purpose applications. By utilising the piezoelectric transducer, the oscillator is able to generate a square wave signal that can be used for timekeeping, data transfer or frequency synthesis.

The specific data is subject to PDF, and the above content is for reference