ECX-H25CM-33.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ECX-H25CM-33.000 Application Field and Working Principle

ECX-H25CM-33.000 oscillator belongs to the category of oscillators, and it has a wide range of applications in a variety of fields.

Application Fields

ECX-H25CM-33.000 oscillator is used in the field of telecommunications to generate signal patterns for the transmission of voice, data and images across large distances. It is also used in the broadcast industry, to generate patterns for the transmission of television and radio signals. Additionally, it is employed in the aerospace industry to generate signals for guidance systems and navigation systems. ECX-H25CM-33.000 oscillator is also utilized in medical equipment as well as in radar systems.

Working Principle

An oscillator is a device that produces a periodic, oscillating electrical waveform. It consists of an amplifier and a feedback network, which are connected together so that the output of the amplifier is fed back into the input. This closed-loop system has a specific response time known as the oscillation frequency or simply the frequency of the oscillator. The output waveform of the ECX-H25CM-33.000 oscillator can be sinusoidal, square, or any other waveform, depending on the type of amplifier and feedback network employed. Generally speaking, the frequency of the oscillator is determined by the values of the components in the amplifier and feedback network. By adjusting the resistor values, the frequency can be alternated to a greater or lesser degree.

In a basic oscillatory circuit, the output of the amplifier is fed back to the input of the amplifier through a resistor and a capacitor. This feedback network is known as an RC oscillator. The resistor provides the load for the amplified signal while the capacitor acts as a filter, allowing only AC signals to be fed back into the amplifier while blocking the DC component. The frequency of the output waveform is determined by the values of these two components. By increasing the resistance, the frequency will increase; by decreasing the resistance, the frequency will decrease.

The ECX-H25CM-33.000 oscillator comprises of a high-performance amplifier along with a precision resistor and capacitor. This combination is designed to generate stable, high-fidelity signal patterns with precise timing. The device is designed for low-noise operation and can achieve a frequency accuracy in the range of +/- 0.2 percent. Additionally, the ECX-H25CM-33.000 oscillator is capable of generating a wide range of frequencies, from 33 kHz to 25MHz.

Conclusion

In conclusion, the ECX-H25CM-33.000 oscillator is an important electronic device used for generating periodic, oscillating electrical waveforms. It is usually used in telecommunications, broadcast, aerospace, medical and radar applications. The oscillator consists of an amplifier and a feedback network, which are connected together so that the output of the amplifier is fed back into the input. The frequency of the oscillator is determined by the values of the components in the amplifier and feedback network. The ECX-H25CM-33.000 oscillator comprises of a high-performance amplifier along with a precision resistor and capacitor. This combination is designed to generate stable, high-fidelity signal patterns with precise timing.

The specific data is subject to PDF, and the above content is for reference