ECX-H32CM-148.3516

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that produce waveforms, such as sine, triangle, and square wave. In the case of the ECX-H32CM-148.3516, it is an oscillator type product that uses an operational amplifier to produce sinusoidal, triangular, and rectangular waveforms. The device is used in various applications such as testing and measuring instrumentation, sensor and position detection, digital signal processing, signal generator applications, and telecommunications.

Main Features and Applications of ECX-H32CM-148.3516

The ECX-H32CM-148.3516 oscillator includes several features such as a frequency range from 2Hz to 10MHz, a maximum operating frequency of 5MHz, a high stability with specified initial error rate of 1Hz over 12 hours, and a low power consumption of about 0.2 watts. It also includes a sinusoidal output voltage of 10Vpp (peak-to-peak) with an output impedance of 200Ω.

The device is suitable for use in a variety of applications due to its wide frequency range and high stability. It is suitable for use in signal generator applications such as frequency tracking, frequency synthesis, and phase locked loops. It can also be used in testing and measurement instrumentation for signal simulation and calibration, sensor and position detection, and digital signal processing. Additionally, it can be used in telecommunications systems for various applications such as base station antenna tuning and call peak mixing.

Working Principle of ECX-H32CM-148.3516

The basic working principle of the ECX-H32CM-148.3516 involves an operational amplifier (op-amp) and an external feedback capacitor, with an added current source for the AC output. The op-amp modulates the input signal and feeds it back into the output in order to produce the desired waveform. The external feedback capacitor is used to control the frequency of operation, while the current source is used to set the amplitude of the output waveform.

When the device is powered on, the op-amp starts to oscillate. The input signal is applied to the op-amp\'s noninverting input. This signal is then amplified by the op-amp and fed back into the output. The amount of feedback is determined by the external feedback capacitor, which in turn determines the frequency of the output waveform. Additionally, the current source is used to set the amplitude of the output waveform.

The output waveform can be adjusted by changing the value of the feedback capacitor, as well as the current source. Additionally, the frequency range can be adjusted by changing the value of the external capacitor. This allows the device to be used in a wide variety of applications.

Conclusion

The ECX-H32CM-148.3516 is an oscillator type device that uses an operational amplifier to produce sinusoidal, triangular, and rectangular waveforms. The device is used in various applications due to its wide range of features, which include a wide frequency range, a high stability, and a low power consumption. The device works by using an op-amp to modulate the input signal and feed it back into the output, with the external feedback capacitor used to control the frequency of operation. Additionally, the current source is used to set the amplitude of the output waveform.

The specific data is subject to PDF, and the above content is for reference