ECX-H37BL-125.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components that produce periodic signals and are essential for communications and other electronic system designs. The ECX-H37BL-125.000 oscillator is a low cost, ruggedized frequency sourcing solution with low phase noise characteristics. It is designed to provide a stable, low-jitter, low-noise signal for consumer-level applications, and comes in a form factor that is compact and easy to install. This device comes with frequencies up to 125MHz and is well suited for applications where frequency accuracy and stability are essential.

The overall architecture of the ECX-H37BL-125.000 oscillator is based on a quartz crystal-controlled oscillator topology. The crystal oscillator circuit consists of an oscillator core, a pair of control logic gates, and a digital-to-analog converter, all of which are integrated onto a single integrated circuit or IC. The oscillator core contains a quartz crystal and is the major source of frequency stability in the ECX-H37BL-125.000 oscillator. The quartz crystal consists of two thin slices of a mineral material (quartz) and two electrical connections. When the electrical connections are alternated between high and low voltages, the quartz crystal produces a frequency that is proportional to the voltage. The quartz crystal is used to energize the oscillator core to provide a stable frequency that does not drift with temperature and other environmental conditions.

The control logic in the ECX-H37BL-125.000 oscillator consists of two programmable logic gates that are used to control the output frequency and pulse width. The digital-to-analog converter converts the digital information from the control logic into an analog signal. The analog signal is then sent to the oscillator core and is used to control the output frequency. The pulse width can also be adjusted by programmable gain stages in the oscillator circuit. In addition, the pulse width can be changed via an external control signal, which can be provided by an external control voltage.

Theoretically, the ECX-H37BL-125.000 oscillator can provide a wide frequency range up to 125MHz. This makes it a great solution for general-purpose applications, including consumer electronics. It is used in many consumer electronics including televisions, video game consoles, portable media players, and other electronic devices. The device is also used in communication systems such as 802.11 Wi-Fi and GSM cellular systems. In addition, the ECX-H37BL-125.000 oscillator is often found in many industrial automation applications.

The main advantage of the ECX-H37BL-125.000 oscillator is its low phase noise performance. Phase noise is the ratio between the stability of a given frequency and the power of the noise component. In other words, it is a measure of how much the frequency can drift from one cycle to the next. Low phase noise performance is important for applications that require minimal signal distortion. The ECX-H37BL-125.000 oscillator can provide this level of performance with its low-noise design.

The ECX-H37BL-125.000 oscillator is highly configurable and can be programmed to output frequencies between 10 MHz and 125 MHz. It also comes with a variety of control pins and registers that can be used to fine tune the output frequency and pulse width. The device is a great solution for consumer and industrial applications that require a stable, low-cost and low-noise frequency source.

The specific data is subject to PDF, and the above content is for reference