ECX-L33BN-120.000 Crystals, Oscillators, Resonators

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	20mA
Operating Temperature:	-40°C ~ 85°C
Series:	ECSpressCON™ ECX-L
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	120MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

ECX-L33BN-120.000 is an oscillator used in many applications. Its working principle and applications fields are often questioned. In this article, the working principle and applications field of ECX-L33BN-120.000 oscillator will be mentioned in detail.

What is Oscillator?

Oscillator is a device that produces signals periodic in nature. It is commonly used for many system synchronization, stabilization, and conversion applications. Oscillator performs its function by providing oscillation or frequency signal for the application. Generally, Oscillator consists of a voltage amplifier, frequency and amplitude control circuitry, and an output circuit.

Classification of Oscillators

Oscillators can be classified into two major categories: analog and digital oscillators. Analog oscillators such as ECX-L33BN-120.000 are used to generate a single frequency. These oscillators use a capacitor to determine and control the frequency. Digital oscillators, on the other hand, are used to generate a specific signal with one or more frequencies. They use digital logic gates to create and control the signal.

Working Principle of ECX-L33BN-120.000

ECX-L33BN-120.000 is an analog oscillator that uses a capacitance-to-frequency circuit to produce an oscillating signal of 120 kHz. It relies on the R-C network of a switching transistor, a capacitor and a resistor connected together. The capacitor is charged through the resistor and as its voltage rises, a certain point is reached where the transistor switches on and the capacitor discharges through the transistor. This results in a rapid drop in voltage, which causes the transistor to switch off and the capacitor to recharge, starting the cycle over again. This creates a sinusoidal signal of 120 kHz.

Applications Fields of ECX-L33BN-120.000

ECX-L33BN-120.000 can be used in various applications including frequency synthesizers, digital hardware systems, communication devices, audio and video equipment, medical devices, security systems, and other electronic systems. Specifically, this oscillator can be used in frequency synthesizers and digital hardware systems to generate a periodic signal for synchronization, timing, and modulation. For audio and video equipment, the oscillator can be used to generate precise frequency for audio signal processing and video clock control. Furthermore, it can be used in medical devices and security systems for generating timing cycles and frequency signals.

Conclusion

In conclusion, ECX-L33BN-120.000 is an oscillator used in many fields. The working principle of the oscillator is based on a capacitance-to-frequency circuit, while its applications fields include frequency synthesizers, digital hardware systems, audio and video equipment, medical devices, and security systems. Therefore, ECX-L33BN-120.000 is an important component for many applications.

The specific data is subject to PDF, and the above content is for reference