ECX-L35CM-11.0592

Oscillators are electronic components which generate on their own a continuous periodic waveform. An oscillator is composed of amplifying components and feedback networks, where the phase shift between the input and the output is 180°, and the gain is greater than 1. Oscillators are widely-used in a wide array of communications, measuring, and detecting applications. Examples include time base generators, audio oscillators, logic clock generators, and phase-locked loops. The ECX-L35CM-11.0592 is an oscillator that is part of the output buffer series from Supertex. This oscillator is key component for the signal output buffer circuit and exhibits a good frequency stability performance, amplifier operation and high output current.

The ECX-L35CM-11.0592 is a versatile ultra-low noise Clock Generator specially designed for multiple applications. The oscillator operates at a frequency of 11.0592 MHz, making it ideal for radio frequency (RF) applications. The output frequency can be set between 8.05 and 15 MHz, adjustable by a capacitance-divider network. The oscillator consumes a total supply current of 240 mA when operating and can be tested down to 12.96 mA during stand-by. Due to its low current consumption, the ECX-L35CM-11.0592 output buffer is suitable for portable applications.

The ECX-L35CM-11.0592 has a wide range of applications including voltage regulator circuit, personal digital assistant (PDA), Global Positioning System (GPS) and electrochemical testing. It is designed to provide high performance support for signal conditioning, memory mapping, image capturing, signal amplification, and impedance adaptation. It can also be used for buffer amplifier application, data acquisition, and satellite communication. With its high output current and low supply current, the oscillator is also suitable for load shifting and steady-state signal generation.

The ECX-L35CM-11.0592 can also be used for signal voltage boosting and filtering. It provides improved noise rejection and high dynamic range for its signal output and helps maintain a low noise floor. The improvement of high and low noise performance can be attributed to its small active area. It also helps to reduce signal distortion and improves signal-to-noise ratio for its application. Moreover, its small active area also ensures that the generator has a lower heat dissipating power.

The working principle of the ECX-L35CM-11.0592 is based on the amplifier’s negative feedback. A feedback network, which consists of resistors, capacitors, and inductors, is used to model the output signal of the amplifier. The output signal amplitude is determined by the input signal, and the feedback loop stabilizes the output. The amplifier controls the current and the voltage stability of the output, setting the output frequency. The frequency stability of the oscillator is determined by the frequency accuracy of the feed network, as well as the amplifier stability. The feed network creates the output frequency, while the amplifier stabilizes the frequency, ensuring an accurate output frequency.

In conclusion, the ECX-L35CM-11.0592 oscillator is an ideal choice for applications that require a low noise, low power, and stable signal output with high dynamic range. It is suitable for a wide range of applications such as voltage regulator circuit, personal digital assistant (PDA), GPS, electrochemical testing, signal conditioner, memory mapping, and image capturing. Its working principle is based on the feedback network and the amplifier, which is used to control the current and voltage stability of the output signal.