ECX-L37BN-106.250

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators such as ECX-L37BN-106.250 are common components of electronic circuits, providing a stable voltage that oscillates at a specific frequency. Despite their ubiquity, few understand the inner workings of an oscillator. In this article, we will discuss the application field and working principle of the ECX-L37BN-106.250.

The ECX-L37BN-106.250 is an oscillator primarily used in industrial applications, such as robotics and automation. Its robust design gives it the ability to withstand operating temperatures from 0 to 70°C, while its low power dissipation makes it ideal for battery operated applications. The oscillator has a standard frequency range of 50 to 250MHz.

To understand the working principle behind the ECX-L37BN-106.250, one must first understand phase- locked loops (PLL). A PLL is an electronic circuit that combines an amplifier and a feedback loop in order to detect and maintain a reference signal. This reference signal is then used to generate a predetermined frequency.

The ECX-L37BN-106.250 utilizes a PLL circuit to generate an oscillation. The circuit begins when the oscillator receives an input signal, which is then amplified. The amplified signal is then sent to the voltage controlled oscillator (VCO). The VCO is a device that oscillates at a predetermined frequency determined by its input voltage.

The output of the VCO is then sent to a frequency divider. The frequency divider is a circuit that takes a signal\'s input frequency, and divides it down to a predetermined output frequency. After the reference signal has been divided, it is then sent to the phase detector.

The phase detector is a device that compares the phase of the reference signal to the phase of the output signal of the PLL. If the phase of the output signal of the PLL is not the same as the reference signal, then the phase detector sends an error signal to the loop filter.

The loop filter is a device that takes in the error signal, and passes a filtered version of the signal back to the VCO. Based on the filtered signal, the VCO will adjust its frequency until the output of the PLL matches the reference signal.

In this way, the ECX-L37BN-106.250 is able to use the power of the PLL to attain a stable output frequency. The end result is a circuit capable of producing a reliable and accurate output signal.

In conclusion, the ECX-L37BN-106.250 is a reliable oscillator used in industrial applications. Its low power consumption and robust design make it suitable for a wide range of applications. Its working principle, based on the PLL, enables it to produce a stable and accurate output signal.

The specific data is subject to PDF, and the above content is for reference