ECX-L37BN-27.000

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.067" (1.70mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	18mA
Operating Temperature:	-40°C ~ 85°C
Series:	ECSpressCON™ ECX-L
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	27MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits that generate periodic, oscillating signals. They are used to generate a certain frequency or waveforms that can be used as a clock signal or used to drive many different types of circuits. One of the most popular oscillators is the ECX-L37BN-27.000. This oscillator is a bipolar transistor based oscillator that uses a capacitor and inductor to generate a sine waveform as its output.The ECX-L37BN-27.000 oscillator has a variety of applications. It can be used as a clock signal generator for microcontrollers, timers, real-time clocks, and audio systems. It can also be used to drive logic circuit, data converters, memory, and signal processing devices. It has numerous applications in industrial control and telecommunications.The working principle of the ECX-L37BN-27.000 oscillator is based on the fact that a voltage, when applied across an inductor, causes an increasing current to flow which is proportional to the rate of increase of the applied voltage. If the voltage is then reversed, the current decreases at the same rate as it increased before, except it is in the opposite direction. This sudden alternation of current creates a sine wave, and this is the way that oscillators create signals.At the heart of the ECX-L37BN-27.000 oscillator is a bipolar transistor configuration, where the collector is connected to the base and the emitter is connected to ground. The transistor acts as a switch and is used to charge a capacitor through an inductor. When the capacitor is at its maximum charge, the transistor is turned off, causing the charge to rapidly discharge through the inductor and charge the capacitor in the opposite direction. This process is repeated continuously and produces a sine wave at the oscillator\'s output.In summary, the ECX-L37BN-27.000 oscillator is a bipolar transistor based oscillator that produces sine waveforms at its output. It has a variety of applications in digital and analog systems, being most commonly used as a clock signal source for microcontrollers, timers, and real-time clocks. Its working principle is based on the fact that when a voltage is applied across an inductor, the current flows in an alternate direction, causing a sine wave to be generated at the output.

The specific data is subject to PDF, and the above content is for reference