Allicdata Part #: | ECX-P25BN-27.000-ND |
Manufacturer Part#: |
ECX-P25BN-27.000 |
Price: | $ 3.15 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | OSC XO 27.0000MHZ LVPECL SMD |
More Detail: | 27MHz XO (Standard) LVPECL Oscillator 2.5V Enable/... |
DataSheet: | ECX-P25BN-27.000 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 2.83500 |
Frequency Stability: | ±50ppm |
Current - Supply (Disable) (Max): | -- |
Height - Seated (Max): | 0.051" (1.30mm) |
Size / Dimension: | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
Package / Case: | 6-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 48mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | ECSpressCON™ ECX-P |
Voltage - Supply: | 2.5V |
Output: | LVPECL |
Function: | Enable/Disable |
Frequency: | 27MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators: ECX-P25BN-27.000 application field and working principle
Oscillators are electronic devices or electrical circuits that produce a periodic, oscillating electronic signals. In particular, an ECX-P25BN-27.000 is an oscillator that consists of a voltage controlled oscillator (VCO) and a frequency divider. The VCO produces a repetitive series of pulses with the frequency varying depending on the value of an external voltage. The frequency divider takes in the repetitive pulses from the VCO as its input and outputs a signal at a frequency which is a fraction of the VCO frequency. This oscillator is specifically designed for use in digital systems.
Application Field
The ECX-P25BN-27.000 oscillator can be found in a wide variety of application fields, such as increased reliability in industrial, medical, and transportation devices. These devices need to be able to operate reliably in harsh environmental conditions. Its small size and low current drain makes it well-suited for these situations. It is also used in embedded systems, robotics, and consumer electronics. In these systems, it is used to maintain crystal clock precision and stability as well as ensuring long or extreme temperature stability.
Working Principle
The ECX-P25BN-27.000 oscillator works by converting a DC voltage input to an AC voltage output. This is done by running a current through a capacitance, inductance, and resistance. This creates an oscillation with a certain frequency. This frequency is determined by the value of those components. The working principle is based on the oscillation of the LC (inductor-capacitor) circuit, as the LC circuit is also known.
The oscillator is comprised of two wound coils and a capacitor. One of the coils is an inductor, and the second is a transformer. The output of the transformer is fed back to the input of the inductor. The feedback creates a positive feedback loop. The capacitor is connected between the input and the output of the inductor.
In the ECX-P25BN-27.000 oscillator, the feedback circuitry creates a output signal that varies in frequency and amplitude depending on the external voltage input. As the external voltage increases, the duty cycle and frequency of the output signal also increases, until they reach a specific limit. When the limit is reached, the output signal will stay at the same frequency, but its duty cycle and amplitude will decrease.
The frequency of the ECX-P25BN-27.000 oscillator is determined by its internal components: the inductance, capacitor and resistance of the LC circuit. The frequency is also affected by the size of the capacitor, the resistance, and the voltage applied to the oscillator. The frequency range of the oscillator can be adjusted by changing the internal components.
Conclusion
The ECX-P25BN-27.000 oscillator is a versatile device, suitable for use in harsh environmental conditions, as well as in embedded, industrial, robotics, and consumer electronics applications. Its working principle is based on the oscillation of the LC circuit, with the frequency being determined by the values of the internal components. As such, the frequency range can be adjusted by changing the components.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...