Allicdata Part #: | ECX-P25CM-40.000-ND |
Manufacturer Part#: |
ECX-P25CM-40.000 |
Price: | $ 3.15 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | OSC XO 40.0000MHZ LVPECL SMD |
More Detail: | 40MHz XO (Standard) LVPECL Oscillator 2.5V Enable/... |
DataSheet: | ECX-P25CM-40.000 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 2.83500 |
Frequency Stability: | ±25ppm |
Current - Supply (Disable) (Max): | -- |
Height - Seated (Max): | 0.051" (1.30mm) |
Size / Dimension: | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
Package / Case: | 6-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 48mA |
Operating Temperature: | -20°C ~ 70°C |
Series: | ECSpressCON™ ECX-P |
Voltage - Supply: | 2.5V |
Output: | LVPECL |
Function: | Enable/Disable |
Frequency: | 40MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to ECX-P25CM-40.000 Oscillators
The ECX-P25CM-40.000 oscillators are a type of oscillator device used to generate high-frequency or low-frequency signals mostly in the radio frequency range. Oscillators are electronic circuits designed to generate repetitive effects using an electrical signal. This signal is usually in the form of a sine wave or a square wave and can be used to generate precise and repetitive signals over a wide range of frequencies.
Applications of ECX-P25CM-40.000 Oscillators
ECX-P25CM-40.000 oscillators are widely used in various applications due to its excellent performance and features such as low phase noise, low power consumption, and high accuracy. It can be used in radio broadcasting, medical equipment, satellites, and mobile devices. The oscillator also finds applications in communication, navigation, radar, air traffic control, and many more.
Working Principle of ECX-P25CM-40.000 Oscillators
The ECX-P25CM-40.000 oscillators work on the principle of an LC circuit which uses inductors and capacitors to create oscillations. An LC circuit consists of a capacitor and a coil that are connected in series along with an AC source. When a voltage is applied to an LC circuit, the capacitor starts charging until it reaches a peak voltage and then starts discharging. With each cycle, the capacitor charges up and discharges back, thus creating a repetitive oscillatory waveform.
The frequency of the oscillations generated by the ECX-P25CM-40.000 oscillators is determined by the ratio of the capacitor and inductor. The higher the ratio, the higher the frequency and vice versa. The frequency can also be adjusted using an external control to meet the requirements of the application.
Advantages of ECX-P25CM-40.000 Oscillators
ECX-P25CM-40.000 oscillators offer many advantages which make them suitable for various applications. These oscillators can operate over a wide range of frequencies and provide excellent performance in terms of frequency accuracy and stability. They also consume low power and have low phase noise. The oscillators also provide good reproducibility and can be tailored to customer specifications. Moreover, the components of the oscillators are small and can be easily integrated into devices.
Disadvantages of ECX-P25CM-40.000 Oscillators
Although ECX-P25CM-40.000 oscillators offer great performance in terms of accuracy and stability, some limitations must be taken into account. These oscillators have limited frequency range and require external control to adjust the frequency. Moreover, they are sensitive to temperature fluctuations and require de-rating for higher temperature applications.
Conclusion
ECX-P25CM-40.000 oscillators are a type of oscillator device used to generate predictable and repeatable signals. They have excellent features such as low phase noise, low power consumption, and high accuracy. The oscillators are widely used in radio broadcasting, medical equipment, satellites, and mobile devices. However, the oscillators have limited frequency range and can be affected by temperature variations.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...