ECX-P32BN-32.768

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are widely used in a variety of applications, ranging from electrical automobiles to power grids. The ECX-P32BN-32.768 oscillator is one of the most common oscillators used today. This device uses a quartz crystal to store and generate electrical signals used for timing and synchronization.

The ECX-P32BN-32.768 is a miniature, low power quartz oscillator that operates with a frequency of 32.768 KHz. The device has two modes of operation: frequency accuracy and calibration. In frequency accuracy mode, the oscillator’s crystal has a frequency accuracy of ±1.5 ppm, making it ideal for precise timekeeping applications. In calibration mode, the crystal can be tuned to any frequency within the 32 kHz range.

This device is also extremely reliable and robust. The quartz crystal used has a temperature coefficient of ±2.5 ppm/°C and an operating temperature range of -20°C to +70°C. The oscillator’s power consumption is also very low at just 1.2 mW.

The ECX-P32BN-32.768 is primarily used in battery-powered applications such as laptop computers, cell phones, digital watches, and other electronic devices. In these applications, the oscillator provides an accurate reference for maintaining system time while in idle mode. It is also used in other applications such as digital signal processing, consumer electronics, and instrumentation.

The device requires a 5 volts power supply and is available in both SMD and through-hole packages. It has a wide load range from 1 to 10 pF. Its signal output can be configured either in the standard logic format or the Clock/Data format. The device also has an operating frequency range of 20 to 30 KHz.

The working principle of the ECX-P32BN-32.768 is based on quartz crystal technology. Quartz crystals are piezoelectric materials, meaning they produce a voltage when subjected to mechanical stress. In the ECX-P32BN-32.768, the crystal is connected to an oscillator circuit that applies a constant voltage across it. The quartz crystal vibrates at its natural frequency, generating an electrical signal. This signal is then used to generate the output signal of the oscillator.

The ECX-P32BN-32.768 oscillator is an ideal device for accurate timekeeping and timing applications. Its low power consumption, wide load range, and reliable operation make it suitable for many battery-powered applications. In addition, its wide operating frequency range and frequency accuracy make it a perfect choice for digital signal processing, consumer electronics, and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference