| Allicdata Part #: | ECX-P33CM-1000.000-ND |
| Manufacturer Part#: |
ECX-P33CM-1000.000 |
| Price: | $ 4.04 |
| Product Category: | Crystals, Oscillators, Resonators |
| Manufacturer: | ECS Inc. |
| Short Description: | OSC XO 1000.0000MHZ LVPECL SMD |
| More Detail: | 1GHz XO (Standard) LVPECL Oscillator 3.3V Enable/D... |
| DataSheet: |  ECX-P33CM-1000.000 Datasheet/PDF |
| Quantity: | 1000 |
| 10 +: | $ 3.67542 |
| Frequency Stability: | ±25ppm |
| Current - Supply (Disable) (Max): | -- |
| Height - Seated (Max): | 0.039" (1.00mm) |
| Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
| Package / Case: | 6-SMD, No Lead |
| Mounting Type: | Surface Mount |
| Ratings: | -- |
| Current - Supply (Max): | 68mA |
| Operating Temperature: | -20°C ~ 70°C |
| Series: | ECSpressCON™ ECX-P |
| Voltage - Supply: | 3.3V |
| Output: | LVPECL |
| Function: | Enable/Disable |
| Frequency: | 1GHz |
| Type: | XO (Standard) |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are used in many areas, including in GPS systems, autonomous vehicles, and medical equipment. The ECX-P33CM-1000.000 oscillator is a versatile and reliable device that can be used to generate an accurate signal with a range of frequencies up to 100MHz. It is designed to be a low-noise, low-power, and low-cost oscillator.
The ECX-P33CM-1000.000 oscillator is commonly used in frequency control applications, where precise frequency is needed. It has a high temperature stability up to -55°C, allowing it to be used in extreme temperature conditions. This device offers adjustable frequency ranges from 0.1Hz to 10MHz, so it is suitable for a wide range of applications.
The working principle behind the ECX-P33CM-1000.000 oscillator is based on a resonator. This is a coil of wire that is connected to an oscillator circuit and excited with a voltage or current. The resonator vibrates due to the current and produces a sinusoidal waveform that is used to generate a signal. This signal can then be amplified and filtered to produce the desired frequency.
The ECX-P33CM-1000.000 oscillator is used in numerous applications, such as radio communications, satellite navigation, electronic instrumentation, and sensor networks. In radio communications, the oscillator is used to generate the carrier signal which is then modulated by the transmitter. In satellite navigation, it is used to generate time reference signals and in electronic instrumentation, it is used for timing and synchronization. In sensor networks, it is used to provide accurate measurements of various parameters.
The oscillator is also used in medical imaging and diagnostic systems, such as MRI and CT scanners, as well as in medical electronics, where it is used to control the motion of motion controllers. Furthermore, the oscillator can be used in automotive applications, both in the powertrain and the body control systems.
Overall, the ECX-P33CM-1000.000 oscillator is a highly reliable device that can be used in a variety of applications. It is widely used due to its temperature stability, wide frequency range, and low-noise operation. Its low-power capabilities make it a great choice for battery-powered applications.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...