ECX-P37BN-14.7456

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components that generate periodic electrical signals - generally sinusoidal signals. ECX-P37BN-14.7456 is a type of oscillator that is designed to provide cost-effective solutions for many applications. In this article, the application fields and the working principle of ECX-P37BN-14.7456 will be discussed.

ECX-P37BN-14.7456 is a common type of oscillator used in a wide range of electronic circuits. It is typically used in applications such as frequency generators, signal generators, timing circuits, and voltage-controlled oscillators (VCO). It can also be used in radio communications, test and measurement equipment, telecommunication systems, and medical equipment.

In terms of its performance, the ECX-P37BN-14.7456 can provide an output frequency range between 1.5 kHz and 100 MHz, with a minimum of ±10 kHz frequency stability, and a maximum of ±30 ppm frequency accuracy. It is capable of reaching an output level of 0.7 dbm with a signal-to-noise ratio of at least 50 dBc.

The ECX-P37BN-14.7456 integrates a VCO circuit on the same chip as the reference oscillator so that the device can remain stable and provide a low noise output. The VCO circuit is based on CMOS technology and uses a positive and negative linearity control. This makes the device highly resistant to temperature and noise variations. The design also includes a programmable gain amplifier (PGA) that can be used to adjust the output frequency.

To understand the working principle of ECX-P37BN-14.7456, we need to look at its two main components – the reference oscillator and the VCO. The reference oscillator is responsible for generating a stable frequency reference, which is then used to control the VCO. The VCO is an oscillator circuit that produces an output signal of a different frequency than the reference oscillator. The output frequency can be adjusted by varying the input signal amplitude.

The reference oscillator is a temperature-compensated crystal oscillator (TCXO). It uses a quartz crystal to maintain the frequency of the reference oscillator at a constant level. The crystal oscillator is coupled with a circuit containing a negative resistor, which helps to maintain the stability of the frequency. This reference oscillator\'s frequency is then fed into the PGA, which is used to adjust the frequency of the VCO.

The VCO is based on CMOS technology and uses linearity control. This enables the user to adjust the frequency output of the VCO by adjusting the input signal amplitude. By doing so, the user is able to achieve precision frequency control of the output signal.

ECX-P37BN-14.7456 provides a cost-effective solution for many applications. It is a reliable source of precision frequency generation, capable of delivering a low noise output. Its integration of the VCO circuit with the reference oscillator allows for stable operation, and its programmable gain amplifier allows for easy adjustment of the output frequency. Therefore, ECX-P37BN-14.7456 is an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference