ECX-P37BN-16.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators have been in use for many years to provide electrical signals with specific characteristics. ECX-P37BN-16.000 oscillator is a type of oscillation that is used when precision and stability is needed. It serves as a reference device that is used to produce a reliable and steady electronic signal. It is widely used for a variety of applications, from generating high-precision signals in radiofrequency and microwave systems to advanced sensor technology.

The ECX-P37BN-16.000 oscillator provides a highly stable frequency output ranging from 16 to 20 MHz with a low phase noise of -93 dBc/Hz at 1 kHz. It has a low power consumption of less than 200 mW and can provide up to 15 dBm of output power. It is also highly reliable, with a short-term stability of 0.5 ppm over -40 to 85 degrees Celsius temperature range, and long-term stability of 2.5 ppm. The ECX-P37BN-16.000 oscillator is a hermetically sealed, surface-mountable device.

The working principle of the oscillator can be explained as follows. A voltage-controlled crystal oscillator (VCXO) is used in the device as the frequency reference source. It combines a quartz tuning fork and an active circuit to adjust the output frequency in response to a voltage input. The quartz tuning fork consists of a strip of quartz that vibrates at its resonant frequency when electrically stimulated. A capacitively coupled amplifier is used to apply the electronic excitation to the quartz tuning fork. This excitation allows the controllable VCXO to accurately control the frequency of the vibration of the quartz tuning fork, which is then used to produce a high-precision signal.

The ECX-P37BN-16.000 oscillator can be used in a variety of applications such as radiofrequency (RF) systems, wireless infrastructure, radar systems, and cellular base stations. Its low noise and wide tuning range makes it ideal for use in systems where frequency stability and fidelity is important. It can also be used in microwave systems and test and measurement equipment as it is able to offer excellent phase noise performance and low-power consumption. In addition, the oscillator is suitable for applications requiring precise signals such as satellite navigation, instrumentation and timing applications.

The ECX-P37BN-16.000 oscillator is a low-noise, high-precision, and low-power oscillator that is widely used in advanced sensor technology and critical precision applications. Its high-stability and wide tuning range makes it an ideal choice for wireless systems, radar systems, and communication applications.

The specific data is subject to PDF, and the above content is for reference