EE-SX977P-C1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical sensors are essential components in many industrial, robotics, medical, home automation, automotive, and scientific applications. In particular, photointerrupters provide an accurate and reliable method to detect the presence of an object using reflective optical sensing. The EE-SX977P-C1 is an example of a slot type photointerrupter that has a transistor output and is used in a wide range of applications.

The EE-SX977P-C1 consists of an infrared light-emitting diode (LED) and a light-sensing phototransistor that are mounted on a small printed circuit board. When an object interrupts the light beam between the LED and the phototransistor, it is detected and the output transistor is switched on or off accordingly. This detection circuit is insensitive to environmental conditions, such as dust, humidity, or ambient light levels.

An array of application areas benefit from the use of this type of photointerrupter: for example, automated factory equipment, robotics, and factory automation; motor control; measurement systems; door/window sensors; conveyance the type systems; disk drives; and medical diagnostic instruments. Because it has a transistor output, the EE-SX977P-C1 can be interfaced with other electronic components, allowing it to be used in a variety of applications.

The EE-SX977P-C1 is a reliable and robust solution for detection and presence activation. Its small size and low power requirements make it suitable for many applications. The working principle of the EE-SX977P-C1 is based on an infrared light beam interruption technique and its output signal is a direct on/off control signal. The phototransistor and LED are both mounted on a printed circuit board. The LED transmits an infrared light beam into a gap between two slots on the PCB and when an object passes through the gap the light beam is interrupted and it is detected. The output provided by the phototransistor changes from “low” (LED on) to “high” (LED off).

In order to ensure accurate detection of the presence of an object, the EE-SX977P-C1 requires a certain amount of ambient light to be present. The light beam must be strong enough to activate the phototransistor, yet not so strong as to cause any light saturation effects. If the ambient light is too faint, an additional infrared light source should be used to assist the EE-SX977P-C1 in its function.

The EE-SX977P-C1 is designed for quick and easy installation and requires only an 8 to 16 V DC power supply. The small size and low profile enable it to be used in applications where space is limited. The EE-SX977P-C1 has some added features such as a wide supply voltage range, a wide operating temperature range (-40 to 85°C), a wide detection distance of up to 10 mm, and a low detection signal level.

The EE-SX977P-C1 is a versatile and reliable sensor for applications where accuracy, reliability, and flexibility are of paramount importance. With its small size, low power requirements, and wide range of features, it offers an ideal solution for a wide range of applications. As with any optical sensor, it is important to ensure proper installation and operation of the EE-SX977P-C1 in order to maximize its effectiveness.

The specific data is subject to PDF, and the above content is for reference