Allicdata Part #: | 399-10892-ND |
Manufacturer Part#: |
EFA(01)-240X240T0800 |
Price: | $ 25.67 |
Product Category: | RF/IF and RFID |
Manufacturer: | KEMET |
Short Description: | FLEX SUPP. SHEET 240X240X0.1 |
More Detail: | N/A |
DataSheet: | EFA(01)-240X240T0800 Datasheet/PDF |
Quantity: | 19 |
1 +: | $ 23.33520 |
10 +: | $ 21.58510 |
25 +: | $ 19.83490 |
100 +: | $ 18.43480 |
250 +: | $ 16.91800 |
Series: | EFA |
Part Status: | Active |
Type: | Absorbing Sheet |
Shape: | Square |
Length: | 9.449" (240.00mm) |
Width: | 9.449" (240.00mm) |
Thickness - Overall: | 0.005" (0.13mm) |
Operating Temperature: | -40°C ~ 105°C |
Adhesive: | Non-Conductive, Single Sided |
Material: | Polymer Resin, Magnetic Powder |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RFI and EMI - Shielding and Absorbing Materials
Radio Frequency Interference (RFI) and Electromagnetic interference (EMI) are two important aspects of the electromagnetic spectrum, both of which are of importance in the world of electronic engineering. In both cases, electromagnetic waves are emitted from electronic devices, which can cause interference with other electronic equipment. To prevent this from occurring, electronic engineers must take measures to protect their systems from both RFI and EMI. The most commonly used method for doing this is the use of shielding and absorption materials.
Shields are materials that are designed to block or redirect electromagnetic radiation away from vulnerable electronic equipment. They can be made of metal, plastic, or other materials, depending on the specific requirements for the intended application. Shields are designed in such a way that the radiation which is blocked, or reflected, is outside the desired frequency range. This prevents any of the generated radiation from affecting the system, protecting it from RFI and EMI. Shields also shield the system from outside sources of RFI or EMI, such as from radio transmitters, TV comments, or cell phone towers.
Absorption materials are specifically designed to absorb, or reduce the amplitude, of unwanted radiation before it reaches the system. These materials can range from a single layer of foam or cloth to sophisticated multi-layer dielectric materials. The most commonly used types of absorbent materials are foam, fibreglass, rubber, and plastics. These materials are often used in combination to form a multi-layer system that increases the absorptive effect of the material while also decreasing back-scatter. The thickness of the absorptive layers and their exact makeup is dependent upon the type of radiation that is to be absorbed.
The EFA (01)-240X240T0800 is a shielding and absorption system designed to protect systems from strong EMI and RFI fields. It is designed with an integrated multi-layer configuration, providing maximum RFI/EMI attenuation by incorporating various types of shielded materials. The material is also capable of withstanding temperatures up to 200° Celsius, making it suitable for a wide range of applications. This includes both indoor and outdoor applications. The EFA (01)-240X240T0800 shielding system can be easily adapted to any system, making it a powerful RFI/EMI solution.
The working principle of the EFA (01)-240X240T0800 shielding system is based on the principle of “reflection” and “absorption." The system works by reflecting any unwanted incoming radiation away from the system and by absorbing any radiation that cannot be reflected. This ensures that any emitted radiation does not interfere with the system and that the system is protected from any external sources of RFI or EMI. This makes the EFA (01)-240X240T0800 shielding system an effective protection solution for a wide variety of electronic systems.
In conclusion, the EFA (01)-240X240T0800 shielding and absorption material is a powerful and effective shielding system designed to maximize system protection from both RFI and EMI. Its reflection and absorption properties make it a suitable choice for any system, both indoor and outdoor, in need of protection from unwanted electromagnetic radiation. The system is easy to install and integrate into any system, making it an ideal solution for protecting vulnerable electronic components.
The specific data is subject to PDF, and the above content is for reference
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB