EG-2002CA 92.5000M-DCHB

Introduction to Oscillators

An oscillator is a type of electronic circuit that generates a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators convert direct current (DC) from a power supply to an alternating current (AC) signal. They are widely used in many electronic devices ranging from Wifi routers to microphones and beyond. Oscillators are also widely used in science and engineering due to their ability to produce a stable and predictable signal over a wide range of frequencies.

EG-2002CA 92.5000M-DCHB Oscillators

EG-2002CA 92.5000M-DCHB oscillators are high precision, low power consumption, wide range, surface mount oscillators. They are designed to provide stable signal outputs with ultra low jitter and excellent temperature stability. With its wide range of applications, the EG-2002CA 92.5000M-DCHB oscillators can be used in a variety of applications, including but not limited to sensors, communication systems, and industrial systems.

EG-2002CA 92.5000M-DCHB Application Field and Working Principle

The EG-2002CA 92.5000M-DCHB oscillator is designed to be used in high precision applications that require a stable and reliable signal output over a wide frequency range. This oscillator can be used in a variety of applications, such as military and aerospace communications, precision timing systems, medical imaging equipment, frequency synthesizers, and navigation and guidance systems. Additionally, the EG-2002CA 92.5000M-DCHB is also designed to be used in precision industrial control systems, automatic test equipment, and laboratory instrumentation.

The EG-2002CA 92.5000M-DCHB oscillator uses a quartz crystal as the frequency determining element. A quartz crystal emits a vibratory electrical signal when the oscillator in operation. This signal creates an oscillating electrical circuits that generates a sinusoidal AC signal with a frequency determined by the quartz crystal\'s resonant frequency. The crystal is designed to oscillate at a frequency that is determined by its specific parameters; including the construction of the crystal, the physical size of the crystal, the temperature of the crystal, and the amount of voltage applied to the crystal.

The frequency output of the EG-2002CA 92.5000M-DCHB oscillator is highly reliable and stable over a wide temperature range (-20°C to +85°C). The oscillator also has an excellent phase noise performance. The phase noise is usually specified in terms of the level of power spectral density (PSD) measured in decibels relative to one Hertz (dBc/Hz). The EG-2002CA 92.5000M-DCHB has a very low phase noise performance of -123dBc/Hz at 5MHz.

The EG-2002CA 92.5000M-DCHB oscillator is designed to be used in a 26 pin package for surface mounting and is packaged in a 100% lead-free, RoHS compliant, and lead (Pb) free moisture sensitive reel format for easy handling. It is characterized for operation over a supply voltage range of 1.8V to 5.5V and has a temperature stability of ±50ppm.

Conclusion

The EG-2002CA 92.5000M-DCHB is a high precision, low power consumption, wide range, surface mount oscillator designed for use in automatic test equipment, sensors, communication systems and industrial control systems. Its frequency stability and phase noise performance are excellent, making it ideal for use in a variety of demanding applications. This crystal oscillator is packaged in a 100% lead-free, RoHS compliant, and lead (Pb) free moisture sensitive reel format, making it easy to use.