EG-2101CA 87.5000M-DCYB

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	25mA
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	60mA
Operating Temperature:	0°C ~ 70°C
Series:	EG-2101CA
Frequency Stability:	±100ppm
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	87.5MHz
Type:	SO (SAW)
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What is EG-2101CA 87.5000M-DCYB Oscillator?

An EG-2101CA 87.5000M-DCYB Oscillator is a type of electronic oscillator that uses an inexpensive quartz crystal to laser-cut a frequency standard, allowing it to generate much more stable and precise tones than traditional crystal oscillators. It is used most often in radio and communications applications, as it can provide reliable frequency control and long-term operation in environments with variable temperatures and other effects.

Application Field of EG-2101CA 87.5000M-DCYB Oscillator

The EG-2101CA 87.5000M-DCYB oscillator has a wide range of applications. It is mainly used for radio communications and navigation systems, as well as in military fields, such as for synchronization of radar systems. The EG-2101CA 87.5000M-DCYB oscillator is also used in radar systems for determining an aircraft\'s location, direction and speed. Additionally, the oscillator is used in various data communications systems, such as in telecommunications systems and global positioning systems (GPS).

Working Principle of EG-2101CA 87.5000M-DCYB Oscillator

The EG-2101CA 87.5000M-DCYB oscillator is designed to work with a quartz crystal to generate signals that are tuned in frequency to a known frequency standard. The quartz crystal is cut at a specific angle and with a specific thickness in order to generate frequencies at specified intervals. The crystal is mounted to a printed circuit board (PCB) and supplied with appropriate electronics such as amplifiers, filters, and resistors. This circuitry is used to create higher-frequency signals from the crystal and to control the circuit\'s output.The quartz crystal serves as the main component of the oscillator. When an alternating current is passed through a quartz crystal, it creates an electric field that causes the crystal to vibrate in such a way that a sine wave is produced as output. The frequency of this sine wave is determined by the physical characteristics of the quartz crystal, such as its size, cut, orientation, and angle. The frequency produced is then amplified and used to control the circuit\'s output.The EG-2101CA 87.5000M-DCYB oscillator uses a frequency-tightening technique based on the quartz crystal to produce a very stable and accurate output signal. The most common method of doing this is to use an amplifier circuit based on a negative feedback loop, which allows for tighter control of the output frequency. The circuit will continuously compare the crystal frequency to an encoded oscillator signal to detect any frequency discrepancies. When discrepancies are detected, the circuit will automatically adjust the output frequency to match the exact frequency of the encoded oscillator signal.

Conclusion

The EG-2101CA 87.5000M-DCYB is a type of oscillator that uses a quartz crystal to generate very reliable and accurate output frequencies. Its applications include radio communications, navigation systems, radar systems, data communications systems, and military applications. Its working principle involves the use of negative feedback loops, amplifiers, and filters to regulate the output frequency of a quartz crystal. The use of an EG-2101CA 87.5000M-DCYB oscillator can provide reliable and accurate frequency control in varying environments, making it an excellent choice for many different applications.

The specific data is subject to PDF, and the above content is for reference