Allicdata Part #: | EG-2102CA125.0000M-LGPNL3-ND |
Manufacturer Part#: |
EG-2102CA 125.0000M-LGPNL3 |
Price: | $ 5.39 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | OSC SO 125.000MHZ LVDS SMD |
More Detail: | 125MHz SO (SAW) LVDS Oscillator 3.3V Enable/Disabl... |
DataSheet: | EG-2102CA 125.0000M-LGPNL3 Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 4.85100 |
Frequency Stability: | ±50ppm |
Current - Supply (Disable) (Max): | 30mA |
Height - Seated (Max): | 0.055" (1.40mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 6-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 45mA |
Operating Temperature: | 0°C ~ 70°C |
Series: | EG-2102CA |
Voltage - Supply: | 3.3V |
Output: | LVDS |
Function: | Enable/Disable |
Frequency: | 125MHz |
Type: | SO (SAW) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are electronic devices primarily used as a source of stable high-frequency sine-wave signals. The EG-2102CA 125.0000M-LGPNL3 oscillator is a type of small-sized quartz oscillator, and is widely used in computer networks, audio systems, radiotelephone communications systems, and control systems. It is an essential component in modern electronics, from basic embedded systems up to sophisticated telecommunications applications.
In comparison to other oscillators, the EG-2102CA 125.0000M-LGPNL3 can provide a higher frequency and higher stability. Its frequency range can be guided by an allowable cone of within ±0.5ppm to ±5ppm. It is also characterized by a very low phase noise and extremely low levels of jitter.
The application field of the EG-2102CA 125.0000M-LGPNL3 is wide-ranging. It is used to generate radio-frequency signals, act as a clock for the CPU of a computer, and it can also be used for medical device synchronization, data transmission, and for wireless communication systems. Quality assurance in these areas requires devices with a high level of accuracy; this is where the EG-2102CA 125.0000M-LGPNL3 oscillator comes in.
The working principle of the EG-2102CA 125.0000M-LGPNL3 oscillator is based on a quartz crystal. This quartz crystal is where the frequency of the sine-wave signal is determined. The crystal is held between two metal electrodes which allow electricity to pass freely. When a voltage is applied to the electrodes, this causes the crystal to vibrate at its resonance frequency. This stable frequency is then converted into an electrical signal and is used for generating the high-frequency sine-wave signal.
This type of oscillator is reliable, cost-effective, and widely used in many industries. It is rated to a high level of accuracy and stability, providing reliable performance. It can be used in a wide variety of applications, making it a reliable choice for generating precise timing and synchronization pulses.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...