EG-2102CA 159.3750M-PGPNB

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	32mA
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	100mA
Operating Temperature:	0°C ~ 70°C
Series:	EG-2102CA
Frequency Stability:	±50ppm
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	159.375MHz
Type:	SO (SAW)
Base Resonator:	Crystal
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EG-2102CA 159.3750M-PGPNB Oscillators

Oscillators are the devices that generate a continuous waveform, usually sinusoidal, over a wide range of frequencies. They are the fundamental building blocks of control and communication systems, providing accurate frequencies to time control systems, amplifying signals, and extracting information from signals. The EG-2102CA 159.3750M-PGPNB oscillator is an essential component of various electronic systems.This oscillator operates at a center frequency of 159.3750MHz with a maximum frequency accuracy of 0.20ppm over a wide temperature range of -40 to 85°C. It is highly stable over the entire industrial temperature range, allowing it to be used in various industrial and general-purpose applications. The device also features a low jitter of 9ps RMS and a built-in PLL (Phase Locked Loop) circuit, which enables a slow frequency sweep response. This makes it suitable for applications where fast turn-on is necessary, as well as for systems where frequency accuracy is important.The EG-2102CA oscillator is composed of two parts: a voltage-controlled oscillator (VCO) and a frequency control loop (FCL). The VCO is a kind of feedback oscillator, which produces a periodic output signal when an alternating current signal is applied to it. The VCO is usually connected to an input voltage source, and the oscillator’s center frequency can be adjusted by changing the voltage. The built-in VCO circuit also features an adjustable gain control which allows users to fine-tune the frequency of the output signal.The FCL provides the necessary feedback in order to maintain the desired frequency of the oscillator. It consists of three components: a Voltage-Controlled Oscillator (VCO), a Comparing Unit (CU), and a Variable Tuner (VT). The CU is the circuitry that senses the output frequency of the oscillator and compares it to the desired center frequency. If the frequencies do not match, the IU amplifies the difference and sends it to the VT, which adjusts the oscillator’s frequency accordingly. The VT then sends a feedback signal to the VCO to increase or decrease its frequency as necessary.The EG-2102CA 159.3750M-PGPNB oscillator offers the best performance and is widely used in various consumer products, such as security cameras, remote sensing devices, and monitoring systems. It is also used for controlling and communication in robotic systems, as well as for the regulation of additive control signals in electronic control systems. Additionally, the oscillator is suitable for use in industrial systems, such as temperature and humidity monitoring and controlling, power distribution, and radio communication equipment. In conclusion, the EG-2102CA 159.3750M-PGPNB oscillator is a reliable and versatile device suitable for a wide range of applications. Its low jitter, excellent stability over temperature, and slow frequency sweep response make it ideal for precision and control applications. This oscillator is highly reliable and offers superior performance in both consumer and industrial applications.

The specific data is subject to PDF, and the above content is for reference