EG-2102CA 166.0000M-PHPAB

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	32mA
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	100mA
Operating Temperature:	0°C ~ 70°C
Series:	EG-2102CA
Frequency Stability:	±100ppm
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	166MHz
Type:	SO (SAW)
Base Resonator:	Crystal
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EG-2102CA 166.0000M-PHPAB Oscillators

Oscillators are electronic circuits that generate a periodic and repetitive signal, usually in the form of an electrical current or voltage. EG-2102CA 166.0000M-PHPAB oscillators are tuned to a specific frequency. They are commonly used for timing and clock signal generation, as well as for voltage control and voltage regulation.

Applications:

EG-2102CA 166.0000M-PHPAB oscillators are used in a wide range of applications, from medical devices and industrial automation to consumer electronics and communication systems. They are used as clock sources in microprocessors and microcontrollers, as well as in telecommunications and broadcasting equipment. Oscillators are also used in sensing and control systems, for frequency metering and control. Finally, they are used as time-base generators for digital circuits, such as digital-to-analog converters.

Working Principle:

EG-2102CA 166.0000M-PHPAB oscillators generate a periodic and repetitive signal, usually in the form of an electrical current or voltage, which is used to control a device or circuit. This signal is produced by exciting an electrical circuit with an oscillating signal, or by means of a feedback circuit. In a typical oscillator circuit, a tuned circuit is excited with a voltage source, such as a battery or power supply. The tuned circuit, composed of capacitors and inductors, is designed to resonate at a specific frequency. When the circuit is excited, the resulting current produces a signal at a constant frequency. This frequency is determined by the value of the capacitor and inductor in the circuit, as well as the frequency of the voltage source. In some oscillator circuits, such as the phase-locked loop (PLL), a feedback circuit is used to produce a continuous signal at a predetermined frequency. This type of oscillator works by comparing the frequency of an input signal with the frequency of an internal reference signal. When the two signals are not equal, the circuit generates an error signal, which is used to adjust the frequency of the internal reference signal.

Types of EG-2102CA 166.0000M-PHPAB Oscillator:

EG-2102CA 166.0000M-PHPAB oscillators come in two basic types, analog and digital. Analog oscillators generate a continuous signal, while digital oscillators generate a series of pulses. An analog oscillator has a frequency control, which is adjusted by changing the value of the components in the circuit. A digital oscillator, on the other hand, has a frequency control that is set by a programmable chip. Analog oscillators are used mainly in sensing and control systems, for frequency metering and control, as well as timing applications. Digital oscillators are used mainly for timing applications and digital-to-analog conversion.

Conclusion:

EG-2102CA 166.0000M-PHPAB oscillators are tuned to a specific frequency and used for a variety of applications, from medical devices and industrial automation, to consumer electronics and communication systems. They are available in both analog and digital varieties, each with its own advantages and disadvantages. Oscillators are essential components of any electronic system and are used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference