Allicdata Part #: | EG-2102CA200.0000M-LHPAL0-ND |
Manufacturer Part#: |
EG-2102CA 200.0000M-LHPAL0 |
Price: | $ 4.98 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | OSC SO 200.000MHZ LVDS SMD |
More Detail: | 200MHz SO (SAW) LVDS Oscillator 3.3V Enable/Disabl... |
DataSheet: | EG-2102CA 200.0000M-LHPAL0 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 4.48088 |
Series: | EG-2102CA |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Base Resonator: | Crystal |
Type: | SO (SAW) |
Frequency: | 200MHz |
Function: | Enable/Disable |
Output: | LVDS |
Voltage - Supply: | 3.3V |
Frequency Stability: | ±100ppm |
Operating Temperature: | 0°C ~ 70°C |
Current - Supply (Max): | 45mA |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 6-SMD, No Lead |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Height - Seated (Max): | 0.055" (1.40mm) |
Current - Supply (Disable) (Max): | 30mA |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to Oscillators
An oscillator is an electronic circuit that produces an alternating current (AC) signal of a particular frequency and magnitude. Oscillators are used for many applications in electronics, such as radio transmitters and receivers, television receivers, computers, and more. They are typically built using components such as resistors, transistors, capacitors, and inductors. The frequency of the AC waveform produced by an oscillator is usually determined by the values of the components used in the circuit.
EG-2102CA 200.0000M-LHPALO Application Field and Working Principle
The EG-2102CA 200.0000M-LHPALO is a low-pass filter based oscillator with a frequency synthesizer. It is commonly used in electronic systems for producing a frequency-synthesized low-pass filtered output waveform. It is capable of producing a wide range of frequencies that can be selected with a single control input.
The operating principle of the EG-2102CA 200.0000M-LHPALO oscillator is based on Frequency Synthesis principles. This type of oscillator works by synthesizing the desired frequency from two or more low-frequency signals. A pulse generator produces pulses which are then applied to a filter which produces a low-pass filtered output waveform that is the sum of the two low-frequency signals. The frequency of the output waveform can then be adjusted by changing the frequency of the pulse generator.
The EG-2102CA 200.0000M-LHPALO oscillator is typically used in applications such as cellular phones, satellite communications, and radar systems. It is ideal for producing high-quality signals with low power consumption and minimal amount of noise. It is also used in medical diagnostic equipment, audio devices, and broadcasting systems.
The EG-2102CA 200.0000M-LHPALO oscillator can also be used in signal processing applications such as frequency-division multiplexing (FDM), frequency-shift keying (FSK), pulse-amplitude modulation (PAM), and phase-shift keying (PSK). Additionally, the filter can be designed to reject unwanted frequencies from the output, thus allowing for more precise signal modulation.
Conclusion
The EG-2102CA 200.0000M-LHPALO is a versatile oscillator that is commonly used for many applications. It is a low-pass filter based oscillator that is capable of producing a wide range of frequencies with a single control input. The EG-2102CA 200.0000M-LHPALO can be used for applications such as cellular phones, satellite communication, radar systems, and signal processing.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...