EG-2102CA 312.5000M-PGPAB

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	32mA
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	100mA
Operating Temperature:	0°C ~ 70°C
Series:	EG-2102CA
Frequency Stability:	±50ppm
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	312.5MHz
Type:	SO (SAW)
Base Resonator:	Crystal
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to EG-2102CA 312.5000M-PGPAB Oscillators

Oscillators are devices that convert a direct current (DC) source into an alternating current (AC) source with a certain frequency and amplitude. Oscillators that generate sinusoidal waveforms are known as sinusoidal oscillators. Oscillators can be classified into two main categories which include analog oscillators and digital oscillators. EG-2102CA 312.5000M-PGPAB oscillators belong to the analog oscillator category. This article provides an overview of the application fields and working principle of EG-2102CA 312.5000M-PGPAB oscillators.

Application Fields of EG-2102CA 312.5000M-PGPAB Oscillators

EG-2102CA 312.5000M-PGPAB oscillators are typically used in the communication industry, especially for radio frequency (RF). They are used in various communication systems, including wireless signals, digital signal processing systems, and cellular base stations.In addition, these oscillators are used in electronic test and measurement equipment to accurately perform frequency measurements and support communication protocols. They are also used in the field of medical technology, such as in medical imaging equipment, as they have the ability to generate high-precision frequency signals.

Working Principle of EG-2102CA 312.5000M-PGPAB Oscillators

EG-2102CA 312.5000M-PGPAB oscillators operate on the principle of a voltage-controlled oscillator (VCO). This type of oscillator consists of a Tuning Fork Oscillator (TFO) and a Voltage-Controlled Oscillator (VCO) integrated circuit.The TFO produces a sinusoidal signal with a frequency that can be adjusted using a capacitance-tuned LC circuit. The VCO then produces an adjustable frequency signal by amplifying the TFO signal and converting it to a square wave.The VCO can be configured to generate a wide range of frequencies depending on the voltage input. A phase-locked loop (PLL) circuit is used to ensure that the output frequency of the oscillator is locked to a set frequency. This is done by comparing the input sinusoidal signal with the output signal and adjusting the input voltage until the two signals are in phase.

Conclusion

In short, EG-2102CA 312.5000M-PGPAB oscillators are used in different fields of the communication industry and medical technology due to their ability to generate high-precision, frequency signals. They operate on the principle of a voltage-controlled oscillator and a phase-locked loop circuit to ensure that the output frequency is locked to a set frequency.

The specific data is subject to PDF, and the above content is for reference