EG-2121CA 100.0000M-VHPAB Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit or device that produces a continuous, repeated steady-state output, utilising energy sources like electricity and atoms or molecules to generate the signal. One of the most common oscillators is the EG-2121CA 100.0000M-VHPAB, which is used in a variety of applications.

The EG-2121CA 100.0000M-VHPAB oscillator is a voltage-controlled oscillator (VCO). It is an integrated circuit that incorporates components such as a capacitor, inductor and active device to generate an oscillatory signal. The VCO has a single port where an input voltage is connected and a single port for a variable output frequency. This oscillator can output signals ranging from 1HZ to 100 MHz in frequency.

Applications

The EG-2121CA 100.0000M-VHPAB is mainly used as a clock generator or for frequency synthesis. It is used in communication systems, such as the Global System for Mobile (GSM) and telecommunications. It is also used as a tunable resonator for radio frequency filtering and other radio signal processing circuitry. It is also used in frequency counters, frequency synthesizers and radio receivers.

Working principle

The operating principle of the EG-2121CA 100.0000M-VHPAB is based on the feedback mechanism between the output voltage and the input voltage. It is based on a “positive feedback” principle, in which a portion of the output is fed back to the input. This causes an increase in the current, and therefore the output signal is amplified. The output signal is a sinusoidal waveform that is determined by the component values, such as the inductor and capacitor value.

The frequency of the output signal is determined by the capacitor and inductor values, as well as the supply voltage. Here, the value of the inductor determines the peak frequency of the signals. This peak frequency can be changed by using different capacitor values or adjusting the supply voltage. The frequency of the signal can also be changed by varying the resistance of the circuit.

Conclusion

The EG-2121CA 100.0000M-VHPAB is a voltage-controlled oscillator with a wide variety of applications. It is mainly used for clock generation and frequency synthesis. It works by the positive feedback principle and its frequency is determined by the component values and the supply voltage. This oscillator can output signals with frequencies ranging from 1 Hz to 100 MHz.

The specific data is subject to PDF, and the above content is for reference