EHF-4CT0835

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF directional couplers are a type of device used in radio frequency (RF) applications to measure the power of an RF signal without interrupting the path of the signal. They are also used to divide the signal for sampling or routing it to other RF devices. The most common form of RF directional couplers is a four-port network consisting of two input ports, an output port, and a coupled port that measures the power of the signal being passed through the network. In this configuration, a set amount of the energy of a signal at the input port is coupled to the coupled port, while the majority of the energy of the signal is passed straight through the network to the output port.

The EHF-4CT0835 is a type of four-port directional coupler used in RF applications. It is a compact, broadband device, which performs the function of splitting and recombining energy from the two RF Input Ports, while allowing for a certain amount of RF power to be bypassed from the input to the coupled port without interrupting the signal travelling to the output port. The EHF-4CT0835 is designed to operate in the fundamental frequency range of 50 to 835 MHz and can handle an input power of up to 10W.

The working principle of the EHF-4CT0835 is based on the three-port junction circuit which is widely used in RF applications to couple two signals in the same frequency range. This three-port junction consists of two input ports connected to a common output port, and a coupled port which is connected to the output port at a distance. The output port is the main signal path, which carries the return signal, while the coupled port is used to sample the signal travelling through the main signal path. Because of the distance between the coupled port and the output port, the energy of the incoming signal is divided between these two ports, with a certain amount of energy being coupled to the coupled port and the rest passing through to the output port.

Due to its wide frequency range and high input power capabilities, the EHF-4CT0835 is a popular choice for a variety of RF applications, from radio communications to radar and instrumentation systems. It can be used for power monitoring, signal splitting, signal routing, impedance matching, and antenna coupling. In addition, the EHF-4CT0835 can also be used in combination with other RF components such as filters and amplifiers in order to create a fully functioning RF system. In this way, it provides a simple and cost-effective way for engineers to create a complete RF system.

As with any RF component, it is important to consider the losses incurred when using the EHF-4CT0835. The device has been designed to minimise these losses, with an insertion loss of typically less than 5dB and a return loss of greater than 22dB across the frequency band of 50-835 MHz. However, these values should be considered in the context of the operating environment, as losses will vary depending on the level of interference in the signal.

In conclusion, the EHF-4CT0835 directional coupler is a useful and flexible device for RF applications. Its wide frequency range and high power handling capabilities makes it an ideal choice for radio communications, radar systems, and instrumentation. This coupled with its low insertion and return losses makes the EHF-4CT0835 a cost-effective and capable choice for any RF application where a four-port RF directional coupler is required.

The specific data is subject to PDF, and the above content is for reference