Allicdata Part #: | EK-23033-000-ND |
Manufacturer Part#: |
EK-23033-000 |
Price: | $ 8.67 |
Product Category: | Audio Products |
Manufacturer: | Knowles |
Short Description: | MICROPHONE |
More Detail: | 100Hz ~ 4.5kHz Analog Microphone Electret Condense... |
DataSheet: | EK-23033-000 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
25 +: | $ 7.87976 |
Series: | EK |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Type: | Electret Condenser |
Output Type: | Analog |
Direction: | Omnidirectional |
Frequency Range: | 100Hz ~ 4.5kHz |
Sensitivity: | -53dB ±2dB @ 74dB SPL |
S/N Ratio: | -- |
Impedance: | 4.4 kOhms |
Voltage - Rated: | 1.3V |
Voltage Range: | 0.9V ~ 10V |
Current - Supply: | 50µA |
Port Location: | Side |
Termination: | Solder Pads |
Size / Dimension: | 0.219" L x 0.157" W (5.56mm x 3.99mm) |
Height (Max): | 0.089" (2.26mm) |
Shape: | Rectangular |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Microphones are a type of transducer which converts sound into electrical signals. The EK-23033-000 microphone is a condenser microphone suitable for acoustic instruments such as acoustic guitar, kalimba and other traditional instruments.
The microphone is composed of a microphone diaphragm, a backplate, an inner winding and an outside shell. It also has an internal pre-amp which amplifies the signal from the microphone. The internal pre-amp can be adjusted for gain, frequency response, and more to provide an optimal recording sound.
The EK-23033-000 is designed to be used in a variety of applications. It can be used for live sound recording, monitoring, and broadcast purposes. It can also be used in studios and in the recording of acoustic instruments. Because of its small size and lightweight design, it is also suitable for indoor and outdoor applications.
The working principle of the EK-23033-000 is based on the diaphragm-backplate principle. The diaphragm is the sensitive part of the microphone which captures sound waves and converts them into electrical signals which are then amplified by the pre-amp. The diaphragm is The diaphragm is held by the backplate, and the backplate is then held in place by a windings around the outside. When sound waves enter the microphone, the diaphragm vibrates, causing a pressure differential between the backplate and the outside.
The pressure differential between the inside and the outside causes a current flow. This current is enlarged by the pre-amp in order to produce the output signal. As the sound wave enters, the pressure increases and decreases causing the diaphragm to move back and forth, producing changes in the voltage of the signal. The pre-amp amplifies this signal and the output signal is then sent to a mixer or recorder for further processing or amplification.
Because it is a small size condenser microphone, the EK-23033-000 is also suitable for small spaces and small instruments. Its omnidirectionalpickup pattern provides even sound reproduction in all directions. The built-in pre-amp can be used to customize the microphone’s frequency response and it is also equipped with low-noise circuitry which helps reduce noise from outside sources.
The EK-23033-000 microphone is a versatile microphone which is designed for a variety of applications in both indoor and outdoor environments. Its small size and lightweight design make it easy to use and transport, and its built-in pre-amp ensures optimal performance in all recording settings.
The specific data is subject to PDF, and the above content is for reference
MIC MEMS DIGITAL PDM OMNI LGA100Hz ~ 10k...
MIC MEMS DIGITAL PDM -26DB100Hz ~ 10kHz ...
MIC PIEZO MEMS ANLG OMNI -38DB250Hz ~ 10...
MIC MEMS DIGITAL PDM OMNI -26DB100Hz ~ 1...
MEMS PIEZO MICROPHONE -38 DB 2.1100Hz ~ ...
IC MIC CMOS/MEMS TOP PORT 6LGA62Hz ~ 15k...