EK-29965-000 Allicdata Electronics
Allicdata Part #:

EK-29965-000-ND

Manufacturer Part#:

EK-29965-000

Price: $ 8.67
Product Category:

Audio Products

Manufacturer: Knowles
Short Description: MICROPHONE
More Detail: 100Hz ~ 10kHz Analog Microphone Electret Condenser...
DataSheet: EK-29965-000 datasheetEK-29965-000 Datasheet/PDF
Quantity: 1000
Lead Free Status / RoHS Status: Lead free / RoHS Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)
25 +: $ 7.87976
Stock 1000Can Ship Immediately
$ 8.67
Specifications
Series: EK
Packaging: Bulk 
Lead Free Status / RoHS Status: --
Part Status: Active
Moisture Sensitivity Level (MSL): --
Type: Electret Condenser
Output Type: Analog
Direction: Omnidirectional
Frequency Range: 100Hz ~ 10kHz
Sensitivity: -57dB ±3dB @ 74dB SPL
S/N Ratio: --
Impedance: 4.4 kOhms
Voltage - Rated: 1.3V
Current - Supply: 50µA
Port Location: Side
Termination: Solder Pads
Size / Dimension: 0.219" L x 0.157" W (5.56mm x 3.99mm)
Height (Max): 0.089" (2.26mm)
Shape: Rectangular
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to EK-29965-000
The EK-29965-000 is a microphone adapter and switching system, designed to capture and transfer audio signals. The system is made up of a combination of a transmitter, a receiver and microphone preamplifier, designed specifically for professional audio applications. It is capable of handling multiple microphones simultaneously and its output is adjustable to match the characteristics of individual microphones.Application Field of EK-29965-000
The EK-29965-000 is a primary tool among professional audio engineers, used mainly in recording and live sound reinforcement applications. The system is ideal for both capturing and transferring audio signals from multiple microphones to one or more locations.
In the studio, the EK-29965-000 can be used to capture sound from multiple microphones for mixing and recording. For example, multiple microphone array microphones can be used to capture a wide range of sounds from an ensemble, allowing the engineer to manipulate sound levels for the best possible blending of sounds. The system also eliminates the need for routing audio signals multiple times, saving on time and ensuring a higher quality output. In addition, the EK-29965-000 can be used to pipe audio signals from a mixing console to multiple rooms in a facility, allowing a sound designer to monitor audio signals in different areas without the need for multiple signal paths.
In live sound applications, the system comes in handy while using more than one microphone on a stage. The EK-29965-000 is capable of routing audio signals from multiple microphones to one or more locations. This allows the sound engineer to monitor and control sound coming from multiple sources in one location, eliminating the need for multiple direct boxes or microphone splitters. In addition to that, the system can also be used to reduce ground noise and crosstalk between multiple channels, providing a much improved sound quality.How Does the EK-29965-000 Work?
The working of EK-29965-000 basically involves sending a signal from one source to multiple destinations simultaneously. This is achieved by means of a transmission line connecting the transmitter and the receiver. The line transmits the audio signal and then feeds it into a preamplifier, which amplifies the signal so it can be sent to the desired destination. The signal is then converted to analog and sent via cable or optic fibre, depending on the type of connection used.The preamplifier adjusts the signal level, allowing for input switching and level control. This is done by adjusting the Sensitivity control , which matches the input to the output. The level can then be adjusted to suit the individual microphone characteristics. The system also enables the engineer to use multiple microphones with the same settings at the same time. This is important in live sound reinforcement applications where sound levels must be balanced and monitored across multiple microphones.Conclusion
The EK-29965-000 is a very useful microphone adapter and switching system, used mainly in professional audio recording and live sound reinforcement applications. It is capable of handling multiple microphones simultaneously and provides adjustable output to match the characteristics of individual microphones. The system eliminates the need for routing audio signals multiple times and also reduces ground noise and crosstalk between multiple channels. Overall, the EK-29965-000 is a highly reliable tool that provides a great solution for any audio engineer.

The specific data is subject to PDF, and the above content is for reference

Latest Products
MP34DT05JTR

MIC MEMS DIGITAL PDM OMNI LGA100Hz ~ 10k...

MP34DT05JTR Allicdata Electronics
MP34DT04TR-C1

MIC MEMS DIGITAL PDM -26DB100Hz ~ 10kHz ...

MP34DT04TR-C1 Allicdata Electronics
PMM-3738-WP-2-R

MIC PIEZO MEMS ANLG OMNI -38DB250Hz ~ 10...

PMM-3738-WP-2-R Allicdata Electronics
MP34DT05TR

MIC MEMS DIGITAL PDM OMNI -26DB100Hz ~ 1...

MP34DT05TR Allicdata Electronics
PMM-3738-WP-R

MEMS PIEZO MICROPHONE -38 DB 2.1100Hz ~ ...

PMM-3738-WP-R Allicdata Electronics
WM7121DIMS/RV

IC MIC CMOS/MEMS TOP PORT 6LGA62Hz ~ 15k...

WM7121DIMS/RV Allicdata Electronics