Allicdata Part #: | 1882-1058-ND |
Manufacturer Part#: |
EL3-E2415 |
Price: | $ 47.54 |
Product Category: | Sensors, Transducers |
Manufacturer: | SICK, Inc. |
Short Description: | SEN PHT NPN DO CBL |
More Detail: | N/A |
DataSheet: | EL3-E2415 Datasheet/PDF |
Quantity: | 9 |
1 +: | $ 43.21800 |
5 +: | $ 41.05710 |
10 +: | $ 37.81580 |
25 +: | $ 33.49410 |
50 +: | $ 32.41350 |
100 +: | $ 31.33310 |
Series: | -- |
Part Status: | Active |
Sensing Method: | Retroreflective |
Sensing Distance: | 3.937" ~ 118.110" (100mm ~ 3m) |
Voltage - Supply: | 10 V ~ 30 V |
Response Time: | -- |
Output Configuration: | NPN - Dark-ON/Light-ON - Selectable |
Connection Method: | Cable |
Ingress Protection: | IP67 |
Cable Length: | -- |
Light Source: | Red LED |
Adjustment Type: | -- |
Operating Temperature: | -25°C ~ 50°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
EL3-E2415 is an industrial-grade, photoelectric optical sensor designed to detect changes in light intensity. It combines a sensing element with an adjustable narrow detection field, making it suitable for applications such as production line safety, security, machine-based automation, and keeping tabs on various activity levels. It is designed for long-term use in harsh and hazardous environments.
Application Fields
The application fields of the EL3-E2415 are far-reaching. It is primarily used in industrial environments where hazardous areas must be monitored. These areas include warehouses, factories, and outdoor areas such as open-air areas near sources of combustible materials. It can be used to ensure the safety of personnel through detection of presence and motion, and can also detect changes in light intensity to measure the activity level of machines.
The sensing element of the EL3-E2415 is also suitable for applications such as remote sensing, gas analysis, and hazardous gas detection, as well as for surveying, mapping, and navigation. It is widely used in agricultural settings, where it can be used to prevent crop loss due to pests, diseases, weeds, and other environmental factors.
Working Principle
The EL3-E2415 relies on the principle of optical sensing. When light passes through the sensing element, a current is generated and sent to the amplifier, which in turn sends a signal to the control unit. The control unit is provided with an adjustable low-voltage setting, which is calibrated to achieve the required detection level. The level of the signal sent to the control unit is measured and then compared to pre-set thresholds to determine if the signal falls within the desired range.
When the signal is within the desired range, the control unit will activate a relay, allowing a circuit to open or close. Depending on the conditions, an audible warning or some other type of alarm can be set to indicate the occurrence of a detectable event. If the signal falls outside the allowable range, the circuit remains closed and a warning signal is activated. The signal can also be used to activate other types of equipment such as robotic arms, conveyor belts, and other types of automation.
Conclusion
As a photoelectric optical sensor, the EL3-E2415 is designed for long-term use in industrial and hazardous environments. The sensing element is capable of detecting changes in light intensity, enabling it to measure activity levels and prevent accidents. It can be used for a wide range of applications, such as remote sensing, gas analysis, hazardous gas detection, and agricultural setting monitoring.
The EL3-E2415 utilizes the principle of optical sensing, where the signal is measured and compared to pre-set thresholds to determine if the signal falls within the desired range. If the signal is within the allowed range, then the control unit will activate a relay, which can be used to open or close a circuit. Otherwise, a warning signal will be activated.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM