Allicdata Part #: | EL4-P2838-ND |
Manufacturer Part#: |
EL4-P2838 |
Price: | $ 53.36 |
Product Category: | Sensors, Transducers |
Manufacturer: | SICK, Inc. |
Short Description: | SEN PHT PNP LO M8 4 PIN W/HEALTH |
More Detail: | N/A |
DataSheet: | EL4-P2838 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 48.51000 |
Series: | ELF4 |
Part Status: | Active |
Sensing Method: | Retroreflective |
Sensing Distance: | 3.937" ~ 188.976" (100mm ~ 4.8m) |
Voltage - Supply: | 10 V ~ 30 V |
Response Time: | -- |
Output Configuration: | PNP |
Connection Method: | Connector, M8 |
Ingress Protection: | IP67 |
Cable Length: | -- |
Light Source: | Red (660nm) |
Adjustment Type: | -- |
Operating Temperature: | -25°C ~ 50°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors have become an increasingly important part of industrial applications in recent years. As the name implies, these sensors use light to detect and usually measure some physical quantity. One of the more popular optical sensors is the EL4-P2838, which is mostly used in industrial applications.
The EL4-P2838 is a pyroelectric infrared (PIR) detector module, which is a type of infrared thermopile sensor or PIR sensor. This means that it detects the infrared radiation emitted by objects and converts it into an electrical signal to measure the temperature of the object. PIR detectors are most commonly used for motion sensing, as they detect the changing temperature of objects as they move.
The EL4-P2838 is a reflection-type sensor, which means it reflects a small portion of emitted energy back to the target and measures the reflected energy to determine the temperature. This type of sensor is ideal for applications that require low power consumption and high accuracy. A key feature of the EL4-P2838 is its wide detection range, which makes it suitable for a variety of applications. The module can be used for motion sensing, smoke detection, gas leakage detection, and even nutritional analysis.
The working principle of the EL4-P2838 is quite simple. It uses an infrared-sensitive pyroelectric detector, along with a sampling circuit and an output amplifier, to generate an output voltage proportional to the infrared radiation detected. When the sensor detects any IR signals, the pyroelectric detector will generate a tiny electric charge that is then amplified by the sampling circuit and output amplifier, and then converted into a usable signal.
The PIR detector used in the EL4-P2838 is a tiny passive device that uses changes in the temperature of the environment to trigger its output. This is why the sensor is so effective at detecting motion. When an object enters the sensor’s field of view, it absorbs the infrared radiation, and the resulting change in temperature triggers the output. The output is then amplified and sent to the signal processing module that is connected to the sensor.
Overall, the EL4-P2838 is a versatile and powerful optical sensor capable of detecting a wide range of objects in various environments. It is especially suitable for industrial applications due to its wide detection range and low power consumption. In addition, it is also user-friendly, as the pyroelectric detector typically requires minimal setup and calibration.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM