ELC-10E122L Allicdata Electronics
Allicdata Part #:

ELC-10E122L-ND

Manufacturer Part#:

ELC-10E122L

Price: $ 0.42
Product Category:

Inductors, Coils, Chokes

Manufacturer: Panasonic Electronic Components
Short Description: FIXED IND 1.2MH 290MA 2 OHM TH
More Detail: 1.2mH Shielded Wirewound Inductor 290mA 2 Ohm Radi...
DataSheet: ELC-10E122L datasheetELC-10E122L Datasheet/PDF
Quantity: 1000
500 +: $ 0.38465
Stock 1000Can Ship Immediately
$ 0.42
Specifications
DC Resistance (DCR): 2 Ohm
Height - Seated (Max): 0.512" (13.00mm)
Size / Dimension: 0.394" Dia (10.00mm)
Supplier Device Package: --
Package / Case: Radial
Mounting Type: Through Hole
Inductance Frequency - Test: 10kHz
Operating Temperature: --
Ratings: --
Frequency - Self Resonant: --
Q @ Freq: --
Series: 10E
Shielding: Shielded
Current - Saturation: --
Current Rating: 290mA
Tolerance: ±10%
Inductance: 1.2mH
Material - Core: --
Type: Wirewound
Part Status: Active
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electronic components that store electrical energy in a magnetic field. As the name suggests, fixed inductors have a fixed inductance produced by either winding a wire around a core made up of ferromagnetic material or by utilizing a flat coil. One type of fixed inductor is the ELC-10E122L, a chip coil device with ferrite core material.

The ELC-10E122L has a wide range of applications, including in radio-frequency (RF) communications, inductance-resonant circuits, transmitters, consumer electronics, and more. This inductor helps mitigate low-noise amplifiers, allowing them to reduce unwanted interference and improve signal-to-noise ratios.

The working principle of the ELC-10E122L is based on the self-induction of electrical currents. When a current flows through a wire, a magnetic field will be generated. This magnetic field will create a voltage in the coil that is proportional to the rate of change of the magnetic field. This voltage is called the inductance voltage, which is the basis of self-inductance.

In addition, the ELC-10E122L also has a “saturation level”, which is the maximum allowable voltage that can pass through the device. A higher saturation level allows more current to flow, which can result in a higher signal quality. This makes the device ideal for RF applications requiring high signal level and efficiency.

The ELC-10E122L’s core is designed to provide a high dielectric loss, allowing for greater electrical energy storage. This helps to reduce the physical size of the inductor while still allowing for higher quality signals. The ELC-10E122L also has a low leakage inductance, meaning that it can maintain the desired inductance levels in applications where there is a high rate of change in current.

Overall, the ELC-10E122L is a highly versatile inductor, providing excellent performance in a variety of electronic circuit applications. Its wide range of applications, working principle, and core design make it suitable for a variety of applications requiring reliable performance and high signal quality.

The specific data is subject to PDF, and the above content is for reference

Latest Products
ELJ-PA100KF2

FIXED IND 10UH 590MA 350 MOHM10H Unshiel...

ELJ-PA100KF2 Allicdata Electronics
PE-1008CQ220JTT

FIXED IND 22NH 1.4A 70 MOHM SMD22nH Unsh...

PE-1008CQ220JTT Allicdata Electronics
L-15W13NGV4E

FIXED IND 13NH 600MA SMD13nH Unshielded ...

L-15W13NGV4E Allicdata Electronics
N06DB681K

FIXED IND 680UH 210MA 4.6 OHM680H Unshie...

N06DB681K Allicdata Electronics
LHL16TB471K

FIXED IND 470UH 1.3A 280 MOHM TH470H Uns...

LHL16TB471K Allicdata Electronics
LAL03TA8R2K

FIXED IND 8.2UH 165MA 2.2 OHM TH8.2H Uns...

LAL03TA8R2K Allicdata Electronics