ELC-15E272

Fixed inductors are passive electromechanical components made from semiconductive materials to create inductive reactance. Through inductive reactance, electrical current flows through a component which responds to a change of voltage or current with a proportional change in magnetic field and current flow, allowing it to produce a desired effect. The ELC-15E272 is one such example of a fixed inductor.

This particular component is a precision molded, radial leaded, ferrite-core, fixed inductor with a maximum inductance of 1.2 mH and a maximum DC current rating of 2.7 amps. It is designed to be used in a wide variety of applications where a fixed inductor is necessary, such as in filters, DC-DC converters, and audio circuits. It is available in a wide array of values, allowing it to be used in almost any project.

The working principle of the ELC-15E272 is based on Faraday’s Law of Induction. According to this law, a changing magnetic field will induce an electric current in a circuit loop. In the ELC-15E272, this is done by passing a current through a wire wound around a ferrite core. As the current passes through the wire, it creates a magnetic field. This field in turn induces an electric current in the circuit, resulting in the desired effect.

One of the most common applications for the ELC-15E272 is in DC-DC converters. In these converters, the inductor creates a magnetic field which then induces a current flow in the circuit according to Faraday’s Law. The induced current is then used to power the circuit, allowing it to produce the desired output.

Another application of the ELC-15E272 is in filter circuits. In these circuits, the inductor is used to create a high-pass or a low-pass filter. This is done by passing a current through the inductor in such a way that it creates a magnetic field which then induces an electric current in the circuit. The induced current then passes through the filter, resulting in the desired filtering effect.

The ELC-15E272 is also used in audio circuits. In these circuits, the inductor is used to create a self-resonant frequency. This frequency is then used to control the frequency response of the circuit, allowing it to produce a desired sound. The inductor also helps reduce noise and distortion in the signal.

Overall, the ELC-15E272 is a valuable component for any application where a fixed inductor is needed. Its small form factor and wide range of values make it an attractive choice for engineers and hobbyists alike. Its working principle based on Faraday’s Law of Induction makes it highly efficient and reliable in all types of applications.