ELC-18E820L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors play an important role in helping devices and circuits perform AC current. One common fixed inductor is the ELC-18E820L. This article will discuss the application field and working principle of the ELC-18E820L.

The ELC-18E820L is a type of fixed inductor capable of operating at frequencies up to 1MHz. It is a wire-wound inductor with an inductance of 8.2uH and a rated current of 320mA. The ELC-18E820L is available in several variants, including axial and radial items.

The ELC-18E820L can be used in a wide range of applications, including electrical filters, pulse generator circuits, and impedance matching circuits. It is also commonly used in motor control, power supply and telecom applications.

The working principle of a fixed inductor relies on the phenomenon known as inductance. Inductance is the ability of a coil of wire to store energy in the form of a magnetic field. When current passes through the coil, it creates a magnetic field, which in turn induces a voltage across the coil. This voltage is proportional to the rate of change of the current passing through the coil.

The ELC-18E820L\'s inductance is relatively low, so it is not suitable for high frequencies applications. It is, however, suitable for applications where a lower frequency is required, such as electrical filters.

In terms of its construction, the ELC-18E820L consists of a ferrite core wound with a coper wire. The core increases the inductance of the component, and the wire increases the current capacity. The component has a dielectric strength of at least 1kV and a maximum temperature range of -55°C to +130°C.

The ELC-18E820L can be used in a wide range of applications, and is relatively easy to implement. It is an excellent choice for applications requiring a low-cost and efficient inductor.

The specific data is subject to PDF, and the above content is for reference