ELF-18D424F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes

Common Mode Chokes (CMCs) are electromagnetic devices, which block the flow of common mode interference currents while allowing the desired signal currents to pass with little or no reduction in signal level. Common Mode Chokes typically consist of two identical inductors, one that is connected in series with the hot line of the signal, and the other which is connected in series with the neutral line. This arrangement, combined with the inductance of the inductors, forms a circuit which blocks the common mode currents while allowing the desired signal currents to pass.

The ELF-18D424F is a compact, low profile common mode choke from ABI Electronics. The device can be used to reduce common mode noise in a variety of applications, such as household electronics, industrial electronics, and automotive electronics. It features a small inductance value of 4.24µH and an extremely low current rating of 1.4A.

Working Principle

The ELF-18D424F works on the principle of magnetic flux coupling. It uses two inductors to create a magnetic field which acts to reduce the common mode interference currents. This is done by setting up a magnetic field which is linked between the two inductors. The strength of the magnetic field depends on the inductance value of each inductor – in the case of the ELF-18D424F, each inductor has an inductance value of 4.24µH.

The magnetic field created by the inductors works to block the common mode interference currents, while allowing the desired signalling currents to pass through with little or no reduction in signal level. This is done by providing a low impedance path for the interfering current, and a high impedance path for the desired signal current. The high impedance path allows the signal current to pass through with minimal loss, while the low impedance path serves to block the interfering current.

Application Field

The ELF-18D424F is suitable for use in a wide range of applications, including both household and industrial electronics. It can be used to reduce noise and interference in a wide range of electronic equipment, such as computers, mobile phones, audio systems, video equipment, and more. In addition, it can also be used in automotive electronics, telecommunication systems, medical systems, and in a variety of other applications where noise reduction or signal enhancement is required.

The ELF-18D424F is a great choice for applications requiring a compact, low profile common mode filter. It has a very small size, measuring just 1.2 x 0.76 x 0.4 inches (30 x 19.2 x 10.2mm), and a very low profile of just 0.4 inches (10mm). This makes it ideal for applications where space is limited.

The ELF-18D424F is also very easy to use, requiring no special setup or installation. It can be simply dropped onto a printed circuit board, and plugged into the desired components. This makes it an ideal choice for applications where installation time is at a premium.

The ELF-18D424F is a great choice for applications requiring a compact, low profile common mode choke. With its small size, low profile, and ease of installation, it is a great choice for applications where space is limited, and installation time is at a premium.

The specific data is subject to PDF, and the above content is for reference