ELF-24V035A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes, also referred to as CM chokes, are components intended to reduce the amount of electrical noise in a circuit by providing impedance to current flow. Common mode chokes serve as a form of electromagnetic interference suppression, filtering out frequencies above the designed cutoff. Depending on the application, common mode chokes are implemented with high-frequency or high-inductance, low-capacitance coils with a ferrite core for added inductance. Common mode chokes provide superior filtering over other types of power line noise suppression because they target the noise at both the positive and negative signal paths. One of the most common application areas for common mode chokes is the ELF-24V035A.

The ELF-24V035A platform is an integrated common mode filter solution that provides up to a 15 dB noise attenuation improvement. It is ideal for applications where high-end performance is required along with decreased complexity and size. The ELF-24V035A features a symmetrical design that focuses on the current noise caused by ultra-high frequency switching, eliminating the need for parasitic chokes. The filtering mechanism is based on a loosely tuned power line filter combined with a common mode choke. This filter has been designed to reject noise up to 50 MHz.

The working principle of common mode chokes is based on Faraday\'s Law of Electromagnetic Induction. When current is flowing through one winding of a transformer, a magnetic field is generated around the winding which induces a voltage in the winding. If the voltage is of opposite polarity, it will reduce the amount of current flowing through that winding. Common mode chokes operate using the same principle by taking advantage of the inductors in the transformer core to reduce the amount of current flowing through the windings. This results in a reduction in electrical noise.

Common mode chokes are often used in hardware such as power supplies and RF amplifiers to reduce the amount of electrical noise produced by the device. They are also used to reduce electromagnetic interference in audio and video equipment, and radio frequency interference on communication lines and in radio transmitters and receivers. Common mode chokes are also used in data transmission, and they have been known to improve the signal-to-noise ratio significantly.

The ELF-24V035A platform is a robust solution designed to reduce common-mode noise levels in power supplies. It has been shown to provide up to 15dB of noise attenuation improvement, while maintaining a low saturation voltage. The platform also features a symmetrical design which helps to reduce the number of components needed by eliminating the need for parasitic chokes. Furthermore, it has a high supply voltage rating and a high filter frequency. As a result, it is well suited for applications that require a high level of performance and a low total solution cost.

Common mode chokes provide effective noise suppression in a wide range of application areas. When used in conjunction with other power line noise suppression mechanisms, they are capable of providing superior performance. The ELF-24V035A platform provides a high level of performance, combined with a compact design and relatively low cost. Because of its features, it is well suited for a wide range of applications that require a high level of performance.

The specific data is subject to PDF, and the above content is for reference