ELL-6UH390M Inductors, Coils, Chokes

DC Resistance (DCR):	150 mOhm
Height - Seated (Max):	0.197" (5.00mm)
Size / Dimension:	0.252" L x 0.236" W (6.40mm x 6.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	--
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	H
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	1A
Tolerance:	±20%
Inductance:	39µH
Material - Core:	--
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>Fixed inductors, such as ELL-6UH390M, are electrical components for storing mechanical energy. A typical fixed inductor has two or more coils of wire wound on a core and a capacitor. When a current is applied to the inductor, the rate of change of current is limited, thus creating a small amount of energy which is stored in the inductor, allowing it to operate at a steady flow. This makes them useful for a variety of applications.</p> <p>In its simplest form, an ELL-6UH390M inductor can be used to decrease or increase the current in a circuit, either by providing current or limiting current, though a more complex application would be to control the power to the circuit. This inductor can also be used as a filter, blocking or attenuating a certain frequency of signals while allowing other frequencies to pass through. For example, if an AC signal is passed through an ELL6-UH390M inductor it will block the higher frequencies, leaving only the lower frequencies to pass.</p> <p>The ELL-6UH390M inductor also has the ability to store energy, develop a magnetic field, and produce an electric field when a current is applied. Additionally, the inductor is also able to sense the changes of a current, changing its own field and allowing a steady current flow. This is due to the inductor’s inductance value, which is measured in Henrys, and when the current flow changes, the inductance in the inductor will also change. This means that the inductor can be used to provide current with stable levels and standardized output so that the current changing in the circuit is minimized.</p> <p>The ELL-6UH390M inductor also provides excellent current transmission partly due to its low inductance value, allowing it to transfer current without losses. This means that the signal can remain as clean as possible, with less distortion and noise in the signal. This makes it ideal for use in power systems, where its stable current transmission capabilities can help improve the efficiency of the system and its performance.</p> <p>Finally, the ELL-6UH390M inductor is designed to be a highly reliable component, providing consistent performance even under rigorous conditions. Its components are designed to withstand extreme temperatures, and its coils are designed to minimize the risk of shorting and heat build-up. This allows the inductor to be used in a variety of applications, from industrial to commercial, and to be used even in harsh environments with the assurance of dependable performance and results.</p>

The specific data is subject to PDF, and the above content is for reference