Allicdata Part #: | 811-2711-ND |
Manufacturer Part#: |
EMH-54/3-Q48NB-C |
Price: | $ 47.47 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Murata Power Solutions Inc. |
Short Description: | DC/DC CONVERTER 54V 162W |
More Detail: | Isolated Module DC DC Converter 1 Output 54V 3A... |
DataSheet: | EMH-54/3-Q48NB-C Datasheet/PDF |
Quantity: | 50 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | $ 43.15500 |
5 +: | $ 42.80850 |
10 +: | $ 42.46200 |
25 +: | $ 41.87010 |
50 +: | $ 40.64160 |
100 +: | $ 38.74450 |
Voltage - Output 3: | -- |
Control Features: | Enable, Active Low |
Size / Dimension: | 2.40" L x 2.30" W x 0.50" H (61.0mm x 58.4mm x 12.7mm) |
Package / Case: | 9-DIP Module, 5 Leads |
Mounting Type: | Through Hole |
Efficiency: | 91.5% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OCP, OTP, OVP, SCP, UVLO |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 2.25kV |
Power (Watts): | 162W |
Current - Output (Max): | 3A |
Series: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 54V |
Voltage - Input (Max): | 72V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters are electrical devices that convert energy from one form to another, typically from a direct current (DC) source to a different DC voltage or current. The EMH-54/3-Q48NB-C is a buck-boost converter which is specifically designed as a bidirectional DC-DC converter capable of bi-directional current transfer. It can be used in applications where the input is AC to DC or DC to DC, or the output is DC to AC or AC to DC. In addition to its versatility in a wide variety of applications, this converter can also deliver stable performance, low noise, and minimal EMF disturbance.
The EMH-54/3-Q48NB-C could be integrated in many different applications. In automotive industry, it could be utilized to enrich the battery-charging performance in various DC charging systems and extend the life of the batteries. In the telecom industry, the converter could be employed to provide stable power conversion from AC/DC to DC/DC for PABXs. In addition, this compact and efficient buck-boost converter can also be useful in home appliances, industrial automation, and AC/DC synchronous pumps.
The EMH-54/3-Q48NB-C consist of a primary side control circuit, a MOSFET switch, and an inductor. It also has an integrated current sensing and active-clamp circuitry that helps in current regulation and minimal EMF disturbance. The converter operates in two stages – boost and buck. During the buck mode, the switch is closed and current flows through the inductor. The current is then transferred to the load. The transferred energy, is also stored in the inductor. During the boost mode, the switch is opened, and the energy stored is transferred back to the load.
During S1 operation, resistors R1, R2, and R3 set the un-powered switch bias, enabling the current sensing electrode voltage output (pin S/3). Pin S/3 contacts the integrated high voltage switch gate drive, allowing the device to output a high voltage proportional to the sensed current. Pin S/1 fetches a pulse width modulation (PWM) signal, providing a duty cycle/frequency control signal. The hysteretic current control algorithm is activated by the presence of the PWM signal and the current sensing pin output. As PWM input value proceeds with change, the output of the switch is regulated by the hysteretic current controller.
In summary, the EMH-54/3-Q48NB-C is an efficient, bidirectional DC-DC buck-boost converter that can be used in a variety of applications. Its integration of an inductor, current sensing, and active clamping circuits make it easy to perform conversion from one energy form to another with minimal EMF disturbance and noise. The hysteretic current control algorithms further make it possible to regulate the output of the switch by adjusting PWM signals. This converter is a viable solution that offers consistent performance in a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...