ENW-89827A2JF RF/IF and RFID |
|
Allicdata Part #: | P14773TR-ND |
Manufacturer Part#: |
ENW-89827A2JF |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RF TXRX MOD BLUETOOTH CHIP ANT |
More Detail: | N/A |
DataSheet: | ENW-89827A2JF Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Serial Interfaces: | I²S, UART |
Package / Case: | PCB Module |
Operating Temperature: | -20°C ~ 70°C |
Mounting Type: | Surface Mount |
Current - Transmitting: | 33mA |
Current - Receiving: | 33mA |
Voltage - Supply: | 1.7 V ~ 4.8 V |
Memory Size: | -- |
Utilized IC / Part: | CC2567 |
Antenna Type: | Integrated, Chip |
Series: | PAN1327 |
Sensitivity: | -93dBm |
Power - Output: | 10dBm |
Data Rate: | 3Mbps |
Frequency: | 2.4GHz |
Modulation: | GFSK |
Protocol: | Bluetooth v4.0 |
RF Family/Standard: | Bluetooth |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Radio Frequency (RF) transceiver modules, such as ENW-89827A2JF, are integrated circuits that enable wireless transmission and reception of information. They provide a cost-effective interface between digital equipment and the wireless world. RF modules are used in a wide variety of wireless applications, from mobile phones to satellites to radio-based sensing systems. The ENW-89827A2JF supports multiple industry standards, making it an ideal product for any wireless application where performance, efficiency, reliability, and cost are key requirements.
The ENW-89827A2JF offers a wide range of features including advanced radio performance, high level of integration, hardware and software compatibility with previous-generation products, and low-power capabilities. This makes it suitable for a broad range of wireless applications including 802.11a/b/g/n, GSM, CDMA, IS-136, PHS, WLAN, and WiMAX. The device supports data rates up to 54 Mbps for 2.4 GHz and up to 300 Mbps for 5 GHz operation. It also features a high linearity power amplifier, a low noise amplifier, and a direct-conversion receiver which can be used to create a complete wireless link.
The ENW-89827A2JF works by transmitting and receiving radio frequency signals. These signals are generated and received by the integrated transceiver, a radio frequency amplifier and demodulator, and a baseband processor. The transceiver acts as an intermediary between the antenna and the baseband processor, sending and receiving information. The radio frequency amplifier amplifies the incoming signal and passes it to the demodulator, which converts the analog signal into digital data. The baseband processor then decodes the digital data and sends it to the intended receiver.
In addition to its radio frequency capabilities, the ENW-89827A2JF also features a variety of additional features that enable wireless connectivity. These include an on-board system processor, an integrated antenna switch, and a low-cost package. The on-board system processor is used to manage the communication between the device and the host system, enabling faster and more reliable connections. The integrated antenna switch can be used to switch between multiple antennas in order to enhance performance or for improved interference rejection. Finally, the low-cost package allows integrators to reduce prototype costs by as much as 50%.
The ENW-89827A2JF is an ideal solution for wireless applications that require performance, efficiency, reliability, and cost. Its advanced features make it suitable for a wide range of applications, and its low-cost package makes it ideal for prototyping. It\'s a versatile product that can be used to create complete wireless links with enhanced connectivity.
The specific data is subject to PDF, and the above content is for reference
2.4GHz transceiver, 64MHz Arm Cortex M4F...
ENET-ZBP113 ZIGBEE MODULE
RF TXRX MODULE ISM>1GHZ U.FL ANT
RF TXRX MOD BLUETOOTH/WIFI U.FL
RF TXRX MOD CELLULAR/NAV U.FL
RF TXRX MODULE ISM ...