Series:	--
Part Status:	Active
RF Family/Standard:	Bluetooth, WiFi
Protocol:	802.11a/b/g/n, Bluetooth v5.0
Modulation:	CCK, DSSS, OFDM
Frequency:	2.4GHz, 5GHz
Data Rate:	150Mbps
Power - Output:	16dBm
Sensitivity:	-98dBm
Serial Interfaces:	JTAG, UART
Antenna Type:	Integrated, Chip
Utilized IC / Part:	88W8977, ENWF9201AZEF, PAN9026
Memory Size:	--
Voltage - Supply:	1.8 V ~ 3.3 V
Current - Receiving:	70mA
Current - Transmitting:	400mA
Mounting Type:	Surface Mount
Operating Temperature:	-30°C ~ 85°C
Package / Case:	51-SMD Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver Modules and the ENW-F9202A1EF Application Field and Working Principle

RF transceiver modules are small, lightweight radio frequency (RF) devices that combine both a transmitter and a receiver into one radio chip. They are widely used in wireless systems and applications for the transmission and reception of signals. A typical application of an RF transceiver module is wireless communication among intelligent systems, such as smart home automation, and low-power wireless sensor networks. The ENW-F9202A1EF RF transceiver module from ESENWACOM is a compact board-level device that is generally used for low-power wireless communication. It has a built-in power amplifier, which allows it to transmit data more efficiently and with a high data rate. The ENW-F9202A1EF has a frequency range of 868 MHz to 915 MHz, and is ideal for applications such as industrial automation, security, medical, automotive, consumer electronics, etc. The ENW-F9202A1EF has a wide range of features. It includes a 20dBm power amplifier, a low power consumption of only 13mA (at maximum power output), and a built-in temperature sensor. There is also a low bit error rate of 1x10-5 and support for up to 32kbps data rate. The ENW-F9202A1EF RF transceiver module has an integrated transmit and receive PLL. Its center frequency can be adjusted up to 10 ppm with a voltage-controlled oscillator (VCO) at 1-time sweep rate. It also includes a digital frequency synthesizer that allows modulation of the signal, as well as a receive AGC for controlling the received power. The working principle behind the ENW-F9202A1EF RF transceiver module is relatively simple. It uses a frequency-shifting method for communication. The data is encoded into a carrier signal, transmitted over the air, and then decoded at the receiver side. The carrier frequency is shifted from the assigned frequency to another frequency (delta) as the transmission is carried out. At the receiver side, the received signal is compared to the assigned frequency and the delta is determined by comparison.The ENW-F9202A1EF RF transceiver module is ideal for low-power wireless communication applications. It has the capability to transfer data at a high data rate and low power consumption. Its wide frequency range makes it suitable for a variety of applications. Its built-in features make it an ideal choice for both industrial and consumer applications. Its frequency-shifting principle makes it cost-effective and reliable.

The specific data is subject to PDF, and the above content is for reference