ER1025-71JR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components used in electrical circuits to increase or decrease the amount of current flow. The ER1025-71JR is a type of fixed inductor designed for use in different applications. This article examines the applications and working principles of the ER1025-71JR.

The ER1025-71JR is a fixed inductor constructed with a ferrite core. It has an inductance of 470uH ± 10% and a rated current of 1.25 Amps. The device measures 12.2 mm x 8.2 mm x 7.7 mm. It also has a resistance of 9 ohms.

The ER1025-71JR is typically used in DC-DC converters, switch-mode power supplies, and power filter circuits. DC-DC converters convert a direct current (DC) input power to a DC output power. Switch-mode power supplies are used to regulate and convert voltages to the desired operating levels. A power filter circuit is a type of electronic filter used to remove or reduce noise in the signal.

The ER1025-71JR works on a basic inductor principle. An inductor has the ability to store energy in its core in the form of a magnetic field. When the current flowing through an inductor changes, it causes a change in the magnetic field and this induces a voltage within the inductor that is proportional to the rate of change of current.

The ER1025-71JR also uses the phenomenon of self-resonance to reduce interference. Self-resonance occurs when the reactance of the inductor is equal to the resistance of the source at a specific frequency (known as the self-resonance frequency). At the self-resonance frequency, the inductor will appear to have an infinite resistance, thus blocking all signals with frequencies higher than the self-resonance frequency.

The ER1025-71JR is used to control the current in the various circuits it is applied in. When a voltage is applied to the inductor, an induced current is generated in the opposite direction, reducing the current flow in the direction in which the current was initially applied. This is known as “reverse-directional current control” and is essential for certain applications, such as filtering. Additionally, the ER1025-71JR can be used as a transformer or for transient voltage suppression.

In conclusion, the ER1025-71JR is a type of fixed inductor designed to increase or decrease current in various circuits. It has a ferrite core, inductance of 470uH ± 10%, and a current rating of 1.25 Amps. The applications of this inductor include DC-DC converters, switch-mode power supplies, and power filter circuits. It works on the principles of inductance and self-resonance, and is also used for reverse-directional current control, transformer, and transient voltage suppression.

The specific data is subject to PDF, and the above content is for reference