ERA-3AEB152V Resistors |
|
Allicdata Part #: | P1.5KDBTR-ND |
Manufacturer Part#: |
ERA-3AEB152V |
Price: | $ 0.02 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES SMD 1.5K OHM 0.1% 1/10W 0603 |
More Detail: | 1.5 kOhms ±0.1% 0.1W, 1/10W Chip Resistor 0603 (16... |
DataSheet: | ERA-3AEB152V Datasheet/PDF |
Quantity: | 145000 |
5000 +: | $ 0.01928 |
10000 +: | $ 0.01799 |
25000 +: | $ 0.01775 |
Series: | ERA-3A |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 1.5 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.1W, 1/10W |
Composition: | Thin Film |
Features: | Automotive AEC-Q200 |
Temperature Coefficient: | ±25ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | 0603 (1608 Metric) |
Supplier Device Package: | 0603 |
Size / Dimension: | 0.063" L x 0.032" W (1.60mm x 0.80mm) |
Height - Seated (Max): | 0.022" (0.55mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The Chip Resistor – Surface Mount (ERA-3AEB152V) is a small device that is used in electronic applications to provide resistance within a circuit. It has a wide variety of uses, from providing temperature protection in charging circuits, to optimizing power levels in switching power supplies, to attenuation of fast changing signals in a variety of other applications. Although it is a simple component, it has some important properties that make it an invaluable part of any electrical system.
The ERA-3AEB152V is a chip resistor that is mounted on the surface of a printed circuit board. It has a small size that allows it to fit in tight spaces, and its connections are designed in a way that makes it easy to integrate into the overall board layout. The resistor is made of a metal film, which is etched onto a ceramic substrate. The metal film is then covered with an epoxy to provide a durable surface that is resistant to corrosion, abrasion, and other environmental stresses. The chip resistor also has an impedance rating of 0-150 ohms, which allows it to be used in various types of circuits.
The ERA-3AEB152V chip resistor has several applications in the electronics industry. One of the most common uses is as a means of temperature protection in charging circuits. These circuits regulate the voltage and current of an electrical device, and adding a chip resistor helps to ensure that the device does not over-charge and sustain damage. In switching power supplies, the chip resistor can be used to limit the current flowing through the circuit, allowing for efficient power distribution to the various components.
The ERA-3AEB152V chip resistor also has the ability to attenuate fast changing signals. These signals may occur due to a malfunction or a confusing signal within a system. The presence of the chip resistor helps to reproduce a clean signal that is easy to interpret and use. This is one of the key components in noise cancellation systems, in which difficult signals are attenuated to create a clear audio signal.
The ERA-3AEB152V chip resistor is an integral part of many different electronic circuits, and its design and application have been continually improved over the years. It can be found in a variety of places, from high-end equipment to consumer electronics. Its small size and durability make it ideal for a variety of applications, and its versatility helps it to become an increasingly important part of any electronic system.
The specific data is subject to PDF, and the above content is for reference
RES SMD 499 OHM 0.1% 1/16W 0402499 Ohms ...
RES SMD 51K OHM 0.1% 1/16W 040251 kOhms ...
RES SMD 4.7K OHM 0.1% 1/16W 04024.7 kOhm...
RES SMD 49.9 OHM 0.1% 1/16W 040249.9 Ohm...
RES SMD 20K OHM 0.1% 1/16W 040220 kOhms ...
RES SMD 3K OHM 0.1% 1/16W 04023 kOhms 0....