ERA-3AEB2612V Resistors |
|
Allicdata Part #: | P26.1KDBTR-ND |
Manufacturer Part#: |
ERA-3AEB2612V |
Price: | $ 0.02 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES SMD 26.1KOHM 0.1% 1/10W 0603 |
More Detail: | 26.1 kOhms ±0.1% 0.1W, 1/10W Chip Resistor 0603 (1... |
DataSheet: | ERA-3AEB2612V Datasheet/PDF |
Quantity: | 90000 |
5000 +: | $ 0.01928 |
10000 +: | $ 0.01799 |
25000 +: | $ 0.01775 |
Series: | ERA-3A |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 26.1 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.1W, 1/10W |
Composition: | Thin Film |
Features: | Automotive AEC-Q200 |
Temperature Coefficient: | ±25ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | 0603 (1608 Metric) |
Supplier Device Package: | 0603 |
Size / Dimension: | 0.063" L x 0.032" W (1.60mm x 0.80mm) |
Height - Seated (Max): | 0.022" (0.55mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistors are important components for almost any circuit and they are available in many different form factors – from simple through-hole resistors to small surface-mount resistors. One of the most popular type of surface mount resistors is the chip resistor. Chip resistors are small flat cylindrical components with just two leads extending from either side, making them ideal for applications with space constraints. The ERA-3AEB2612V is a chip resistor from Panasonic\'s Crossover Series, which is designed for power management applications. This resistor has four key features – low noise, low DCR (dynamic conductance rate), small form factor, and high accuracy. From an application point of view, the ERA-3AEB2612V is suitable for any type of application where a high degree of accuracy and stability is required. This includes automotive electronics, industrial instruments, medical devices, power electronics, and consumer products. The ERA-3AEB2612V has a 0.075 ohm DCR, and an accuracy of ±0.02%. It also has a max operating temperature of 105°C, a capacitance of 0.02pF, and a power dissipation of 1/4W. As far as the working principle goes, chip resistors operate the same way as other resistors. Resistors are basically a device that restricts the flow of electricity by providing resistance. This is achieved by increasing the distance between the current’s electrons and protons, forcing them to pass through an obstacle such as a sheet of metal or a piece of carbon-based material. When electricity is applied to a chip resistor, the electrons experience resistance. This results in the conversion of some of the electricity into heat, resulting in a drop in voltage. The level of resistance and voltage drop depends on the resistor’s total resistance (ohms) and the amount of current (amperes) being conducted. The ERA-3AEB2612V also features a ‘low-impedance’ design, which helps reduce the amount of voltage loss. This type of design is common in power management applications, where voltage stability and accuracy are extremely important. The ERA-3AEB2612V is a high-precision chip resistor that works great in applications where accuracy and stability are paramount. It is ideal for a wide range of applications, from automotive electronics to consumer products. Its low noise and low DCR characteristics make it a great choice for any power management application.
The specific data is subject to PDF, and the above content is for reference
RES SMD 499 OHM 0.1% 1/16W 0402499 Ohms ...
RES SMD 51K OHM 0.1% 1/16W 040251 kOhms ...
RES SMD 4.7K OHM 0.1% 1/16W 04024.7 kOhm...
RES SMD 49.9 OHM 0.1% 1/16W 040249.9 Ohm...
RES SMD 20K OHM 0.1% 1/16W 040220 kOhms ...
RES SMD 3K OHM 0.1% 1/16W 04023 kOhms 0....