ERA-3AEB682V Resistors |
|
Allicdata Part #: | P6.8KDBTR-ND |
Manufacturer Part#: |
ERA-3AEB682V |
Price: | $ 0.02 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES SMD 6.8K OHM 0.1% 1/10W 0603 |
More Detail: | 6.8 kOhms ±0.1% 0.1W, 1/10W Chip Resistor 0603 (16... |
DataSheet: | ERA-3AEB682V Datasheet/PDF |
Quantity: | 80000 |
5000 +: | $ 0.01928 |
10000 +: | $ 0.01799 |
25000 +: | $ 0.01775 |
Series: | ERA-3A |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 6.8 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.1W, 1/10W |
Composition: | Thin Film |
Features: | Automotive AEC-Q200 |
Temperature Coefficient: | ±25ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | 0603 (1608 Metric) |
Supplier Device Package: | 0603 |
Size / Dimension: | 0.063" L x 0.032" W (1.60mm x 0.80mm) |
Height - Seated (Max): | 0.022" (0.55mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Chip Resistor - Surface Mount products are becoming one of the most widely used components in the electronic industry, as they are generally small enough to fit into tight spaces such as printed circuit boards. The ERA-3AEB682V is one example of a modern surface mount chip resistor. This component is of particular importance due to its extremely low resistance value in comparison to its size, as well as its high precision and temperature coefficient of resistance.
Application Field
The ERA-3AEB682V is an ideal choice for applications requiring a low resistance value with high precision and temperature drift. This device is often used in motor controls, cellular phones, laptops, communication devices, digital cameras, and many other products. It is also is used as a radio frequency (RF) resistor, due to the fact that its low resistance value allows it to dissipate correctly any generated RF signals.
Working Principle
The ERA-3AEB682V utilizes a resistive material to control the flow of electrical current. The resistive material is then connected to two metal oxide terminals which act as contacts for the device. These two contacts are then connected to the printed circuit board. Different resistive materials can be used in order to adjust the resistance value of the device. This can be done by either changing the thickness or length of the resistive material, or by using a different material entirely. To measure the resistance value of the device, the printed circuit board will have precision measuring equipment connected to the two terminals.
The chip resistor also utilizes a technique known as pulsed laser welding in order to provide a secure and reliable connection with the printed circuit. This connection is extremely important, as any flaws could result in catastrophic failure or signal loss. The resistance of the resistor can also be adjusted through the use of laser trimming, which is done with a laser set to the required resistance value. All of these steps ensure that the ERA-3AEB682V produces a consistent and reliable output.
Conclusion
The ERA-3AEB682V is a high-quality chip resistor with a wide variety of applications. It is capable of providing very low resistance values in a secure and reliable manner. It is also capable of withstanding extreme temperatures and still maintaining a consistent performance. Given its numerous benefits and features, the ERA-3AEB682V is a great choice for any electrical or electronic project.
The specific data is subject to PDF, and the above content is for reference
RES SMD 499 OHM 0.1% 1/16W 0402499 Ohms ...
RES SMD 51K OHM 0.1% 1/16W 040251 kOhms ...
RES SMD 4.7K OHM 0.1% 1/16W 04024.7 kOhm...
RES SMD 49.9 OHM 0.1% 1/16W 040249.9 Ohm...
RES SMD 20K OHM 0.1% 1/16W 040220 kOhms ...
RES SMD 3K OHM 0.1% 1/16W 04023 kOhms 0....