ERA-S15J120V Resistors |
|
Allicdata Part #: | P12CBTR-ND |
Manufacturer Part#: |
ERA-S15J120V |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES TEMP SENS 12 OHM 5% 1/10W |
More Detail: | 12 Ohms ±5% 0.1W, 1/10W Temperature Sensitive Spec... |
DataSheet: | ERA-S15J120V Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | ERAS |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Type: | Temperature Sensitive |
Applications: | Temperature Correction Circuits |
Composition: | Metal Film |
Resistance: | 12 Ohms |
Tolerance: | ±5% |
Power (Watts): | 0.1W, 1/10W |
Temperature Coefficient: | 1500ppm/°C |
Operating Temperature: | -40°C ~ 125°C |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Specialized resistors are an essential component in many electrical systems, and ERA-S15J120V is a type of specialized resistor that provides reliable and accurate results. This article will discuss the application field and working principle of ERA-S15J120V.
The ERA-S15J120V is a small, surface-mountable resistor designed for applications requiring high accuracy performance. It consists of a thin-film resistor element printed onto a substrate, which is usually made from a ceramic material. The resistor can be used for a wide range of applications, including measuring voltage and current, filtering electrical signals, and creating controlled electrical pulses. It is also used in many medical, industrial, and automotive applications.
To understand how ERA-S15J120V resistor works, it is important to understand the resistor’s two basic properties: resistance and wattage. Resistance is the amount of opposition an electric current experiences when it flows through a conductor. In this case, the ERA-S15J120V resistor element has a resistance of 120 ohms. The wattage is essentially the amount of power the resistor is designed to dissipate. In this case, the wattage is 0.1 W.
The ERA-S15J120V uses a three-terminal design to achieve its desired level of performance. Two of the terminals are connected to the resistor element, while the third terminal is connected to a ground plane or chassis. The resistor element is designed to be as thin as possible to maximize its sensitivity and reduce its tolerance. This allows it to be used in a wide range of applications.
In a typical application, the ERA-S15J120V is used to measure the voltage and current in a circuit. When a voltage is applied to the resistor, it produces a certain amount of current based on its resistance. This current is then amplified and fed into a measuring circuit. Measuring the resulting voltage gives the engineer an indication of the current on the circuit.
The ERA-S15J120V is a versatile insulated resistor that can be used in a wide range of applications. It is designed to dissipate 0.1 W and has a resistance of 120 ohms. It uses a three-terminal design, and is thin and small enough to be used in even the most compact electronic systems. The ERA-S15J120V is the ideal choice for any application requiring accurate results with minimal power consumption.
The specific data is subject to PDF, and the above content is for reference
RESISTOR SHUNT 50 UOHM 36W50 Ohms 5% 36W...
LOW PROFILE POWER RES 10OHM 175W10 Ohms ...
RES TEMP SENSOR 1.5 OHM 5% 1/16W1.5 kOhm...
RES BRAKE BLEEDER 5 OHM 10% 175W5 Ohms 1...
RES BLADE ATO 62 OHM 1% 0.4W62 Ohms 1% 0...
RES HIGH VOLT 100M OHM 5% 1.3W100 MOhms ...