ERA-S33J391V Resistors |
|
Allicdata Part #: | P390CDTR-ND |
Manufacturer Part#: |
ERA-S33J391V |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES TEMP SENS 390 OHM 5% 1/10W |
More Detail: | 390 Ohms ±5% 0.1W, 1/10W Temperature Sensitive Spe... |
DataSheet: | ERA-S33J391V Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | ERAS |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Type: | Temperature Sensitive |
Applications: | Temperature Correction Circuits |
Composition: | Metal Film |
Resistance: | 390 Ohms |
Tolerance: | ±5% |
Power (Watts): | 0.1W, 1/10W |
Temperature Coefficient: | 3300ppm/°C |
Operating Temperature: | -40°C ~ 125°C |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Specialized Resistors play a critical role in modern electronics and telecommunications. Among them lies the ERA-S33J391V, a small low power ground fault sensor. The device has proven its wide-ranging performance in a variety of industrial, consumer and military applications.
The ERA-S33J391V is a three terminal device designed for the detection of ground faults in systems up to 50 Volts. The device contains an N-channel MOSFET field effect transistor (FET) and a high gain differential amplifier. It is protected against wide voltage swings and parasitic interferences. The FET is able to detect small changes in ground potential due to ground faults and to activate the bias current of the amplifier.
The working principle of the ERA-S33J391V is quite simple. The device is connected to the ground line and a small amount of current flows through it. When a ground fault occurs, the current flowing through the ERA-S33J391V is altered. This change in current triggers the amplifier, and it produces a voltage in proportion to the fault current. The amplifier is designed so that if a current exceeds a certain threshold magnitude, the output voltage will be sufficient to drive any associated circuit.
The ERA-S33J391V is widely applicable in a variety of fields. It can be used to detect ground faults in motor control circuits, industrial equipment, and military applications. It can also be used for detecting small changes in ground potential in power supply lines, control systems, and process controllers.>
In motor control circuits, the ERA-S33J391V can be used to detect current variations that may occur due to ground faults. By sensing small changes in ground potential due to a ground fault, the device can be used to trip an associated relay. This can provide protection against overheating or fire caused by ground fault circuit conditions.
In industrial equipment, the device can be used to detect unwanted intrusions. By measuring small changes in ground potential due to a fault, the device can be used to trip a relay and provide alarm or over-ride conditions. This can prevent costly and dangerous situations from occurring.
The ERA-S33J391V can also be used in military applications. It is able to detect changes in ground potential due to detonations or other events and activate switches and relays. This can be used to neutralize explosives or provide early warning of hostile activity.
The ERA-S33J391V is a versatile device that can be used in a wide variety of applications. Its low power consumption and high sensitivity make it an ideal choice for a broad range of ground fault sensing applications. The device is designed for use in industrial, consumer, and military applications, where reliable and accurate ground fault protection is required.
The specific data is subject to PDF, and the above content is for reference
RESISTOR SHUNT 50 UOHM 36W50 Ohms 5% 36W...
LOW PROFILE POWER RES 10OHM 175W10 Ohms ...
RES TEMP SENSOR 1.5 OHM 5% 1/16W1.5 kOhm...
RES BRAKE BLEEDER 5 OHM 10% 175W5 Ohms 1...
RES BLADE ATO 62 OHM 1% 0.4W62 Ohms 1% 0...
RES HIGH VOLT 100M OHM 5% 1.3W100 MOhms ...