Allicdata Part #: | P3.9KCFTR-ND |
Manufacturer Part#: |
ERA-V15J392V |
Price: | $ 0.06 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES TEMP SENS 3.9K OHM 5% 1/16W |
More Detail: | 3.9 kOhms ±5% 0.063W, 1/16W Temperature Sensitive ... |
DataSheet: | ERA-V15J392V Datasheet/PDF |
Quantity: | 5000 |
5000 +: | $ 0.05339 |
Series: | ERAV |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Type: | Temperature Sensitive |
Applications: | Temperature Correction Circuits |
Composition: | Metal Film |
Resistance: | 3.9 kOhms |
Tolerance: | ±5% |
Power (Watts): | 0.063W, 1/16W |
Temperature Coefficient: | 1500ppm/°C |
Operating Temperature: | -40°C ~ 125°C |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ERA-V15J392V is a specialized resistor designed for a variety of applications. The resistor is composed of three parts: a metal casing, a resistor element, and a terminal. The metal casing is designed to protect the resistor against the elements and provide electrical shielding from electromagnetic interference. The resistor element is composed of two types of ceramic material and is designed to provide a specific value of resistance for the desired application. The terminal is designed to provide a connection to the circuits in which the resistor is being used.
The ERA-V15J392V is a variable resistor, meaning that the resistance value can be adjusted. This is done by using a potentiometer, which is a type of voltage divider. The potentiometer is connected to the terminal of the resistor and is used to adjust the resistance value of the resistor. The resistor can be set to any resistance value within its range by adjusting the potentiometer. The resistor is most commonly used for applications that require precise adjustments to the resistance value, such as in radio tuning and voltage feedback control.
The ERA-V15J392V is also used in impedance matching applications. Impedance matching is a process by which two impedances are matched in order to optimize the performance of a circuit. By adjusting the resistance value of the ERA-V15J392V, the impedance can be made equal on both sides of the circuit, thus optimizing its performance. This is most commonly seen in radio antennas, where the ERA-V15J392V is used to match the impedance of the antenna with that of the receiver.
The ERA-V15J392V is also used to provide a linear relationship between a voltage and a resistance. This is accomplished by using a voltage divider, which is composed of two resistors in series. As the voltage across the voltage divider increases, the resistance of the ERA-V15J392V increases as well. This type of application is commonly used in temperature sensing circuits and pressure sensing circuits.
Finally, the ERA-V15J392V is also used in analog signal conditioning applications. Analog signal conditioning is a process of manipulating signals for the purposes of improving accuracy and reducing noise. For example, the ERA-V15J392V can be used in combination with amplifiers and filters to reduce distortion and noise on analog signals. This type of application is commonly used in medical instruments, test equipment, and audio systems.
Overall, the ERA-V15J392V is a versatile resistor that can be used in a variety of applications. Its ability to adjust the resistance value, provide linear relationships, and manipulate signals make it an invaluable tool in a wide range of electronics applications.
The specific data is subject to PDF, and the above content is for reference
RESISTOR SHUNT 50 UOHM 36W50 Ohms 5% 36W...
LOW PROFILE POWER RES 10OHM 175W10 Ohms ...
RES TEMP SENSOR 1.5 OHM 5% 1/16W1.5 kOhm...
RES BRAKE BLEEDER 5 OHM 10% 175W5 Ohms 1...
RES BLADE ATO 62 OHM 1% 0.4W62 Ohms 1% 0...
RES HIGH VOLT 100M OHM 5% 1.3W100 MOhms ...