Allicdata Part #: | P390CGTR-ND |
Manufacturer Part#: |
ERA-V27J391V |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES TEMP SENS 390 OHM 5% 1/16W |
More Detail: | 390 Ohms ±5% 0.063W, 1/16W Temperature Sensitive S... |
DataSheet: | ERA-V27J391V Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | ERAV |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Type: | Temperature Sensitive |
Applications: | Temperature Correction Circuits |
Composition: | Metal Film |
Resistance: | 390 Ohms |
Tolerance: | ±5% |
Power (Watts): | 0.063W, 1/16W |
Temperature Coefficient: | 2700ppm/°C |
Operating Temperature: | -40°C ~ 125°C |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Specialized Resistors like the ERA-V27J391V have many applications and use large arrays of components repeatedly and interchangeably to tailor their work and suit the application. One of the main areas that specialized resistors like the ERA-V27J391V are used in is in the Electronic Industries. Specialized Resistors are used for high-speed signal processing, failure prevention, and circuit protection. In addition to this special resistors are used in communication technologies, wireless transmitters/receivers, solid-state drives, hard disks, automated production, and robots.
The ERA-V27J391V is a type of specialized resistor that is used in the electronics industry for specific tasks. Its main application is to find impedance and resistance in circuits. It is a three-terminal resistor which has a value of 27K ohms with a 1% tolerance, meaning that it has an accuracy rating of 1%. This accuracy rating is important in the electronics industry as a circuit which is perfectly tuned is essential in order for it to work correctly.
The ERA-V27J391V is also used in measuring the amount of current flowing through a circuit and in determining the voltage in an active circuit. It is also used to match impedances in lead-free solder joints to minimize the amount of distortion in the signal. This type of resistor also has a low-noise coefficient which is beneficial in circuits where noise reduction and accuracy are important.
The operating principle of the ERA-V27J391V is based on Ohm\'s Law which states that the voltage is equal to current multiplied by resistance. In the ERA-V27J391V the voltage is applied to the first two terminals and the third terminal measures the resistance. Depending on the value of the applied voltage, the current will flow through the circuit and the resistor will measure the resistance or impedance in the circuit. The ERA-V27J391V will also measure the amount of current required to maintain a certain voltage in active circuits.
In conclusion, the ERA-V27J391V is an essential component in the modern electronic industry. It is used to measure the amount of resistance or impedance in circuits as well as measure the amount of current flowing through the circuit. It also has a low-noise coefficient which is beneficial in circuits where accuracy is important. Finally, its operating principle is based on Ohm\'s Law and it applies a voltage to two terminals and measures the resistance at the third terminal.
The specific data is subject to PDF, and the above content is for reference
RESISTOR SHUNT 50 UOHM 36W50 Ohms 5% 36W...
LOW PROFILE POWER RES 10OHM 175W10 Ohms ...
RES TEMP SENSOR 1.5 OHM 5% 1/16W1.5 kOhm...
RES BRAKE BLEEDER 5 OHM 10% 175W5 Ohms 1...
RES BLADE ATO 62 OHM 1% 0.4W62 Ohms 1% 0...
RES HIGH VOLT 100M OHM 5% 1.3W100 MOhms ...