| Allicdata Part #: | P11W-1BK-ND |
| Manufacturer Part#: |
ERG-1SJ110 |
| Price: | $ 0.14 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES 11 OHM 1W 5% AXIAL |
| More Detail: | 11 Ohms ±5% 1W Through Hole Resistor Axial Flame P... |
| DataSheet: |  ERG-1SJ110 Datasheet/PDF |
| Quantity: | 1019 |
| 1 +: | $ 0.12150 |
| 10 +: | $ 0.10350 |
| 25 +: | $ 0.07524 |
| 50 +: | $ 0.05454 |
| 100 +: | $ 0.04046 |
| 250 +: | $ 0.03103 |
| 500 +: | $ 0.02445 |
| 1000 +: | $ 0.01693 |
| 5000 +: | $ 0.01411 |
| Series: | ERG |
| Packaging: | Bulk |
| Part Status: | Active |
| Resistance: | 11 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 1W |
| Composition: | Metal Oxide Film |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | ±350ppm/°C |
| Operating Temperature: | -55°C ~ 235°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.110" Dia x 0.354" L (2.80mm x 9.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are one of the most common components used in electrical and electronic engineering applications, and the ERG-1SJ110 is no exception. With its compact size, high accuracy, and low power consumption, the ERG-1SJ110 is an ideal choice for all types of electronic circuit designs.
The ERG-1SJ110 is a four-watt, through-hole resistor that comes in a variety of packages. It is constructed of a metal film, with a silicon dioxide insulation layer in between. This construction gives it excellent thermal and electrical properties, and makes it extremely durable and reliable. In addition, the resistor is able to handle high voltages and high power levels up to ten times its rated value.
The ERG-1SJ110 comes with either two or three terminals, depending on the particular package. Each terminal is connected to a layer of the metal film and is connected to a pair of contacts that are used for grounding and for attaching other components to the circuit. The leads are usually connected to a substrate that is soldered to the printed circuit board, and this allows for the resistor to be embedded in the board, providing better protection from external damage.
The resistor works by providing a load resistance between two electrical points. When current flows through the resistor, the voltage is divided between the two points. The voltage drop across the resistor is equal to the product of the load and the current flowing through it. This means that the resistor can be used to adjust the voltage that is supplied to a circuit, or to limit the current that flows through it. by adjusting the resistance. The ERG-1SJ110 provides excellent temperature stability, making it ideal for use in applications where precise voltage and current levels are required.
Because the ERG-1SJ110 is so small and versatile, it is used in a wide variety of applications. It can be used to protect electronic circuits from overvoltage and overcurrent, as well as to regulate power for many devices. It is also used as a temperature regulator in heating and cooling applications, and as a voltage reference in power supply applications. Other uses include protection circuits for logic control, display circuits, and analog data conversion.
The ERG-1SJ110 is easy to incorporate into circuits and requires minimal maintenance. It is a low cost resistor option and is widely available. With its high accuracy and low power consumption, it is quickly becoming one of the most popular through-hole resistors on the market.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...