ERG-1SJ120V

Series:	ERG
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	12 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±350ppm/°C
Operating Temperature:	-55°C ~ 235°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.110" Dia x 0.354" L (2.80mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<div class="center"><h3> Through Hole Resistors</h3></div><p>Through hole resistors are resistors designed and manufactured for use in applications where they are soldered directly onto a printed circuit board or other substrate. They are commonly used to resist electrical noise or interference in electronic circuits. The ERG-1SJ120V is a through-hole resistor manufactured by Panasonic and is specifically designed for high temperature applications.</p><p>The ERG-1SJ120V is an NTC (Negative Temperature Coefficient) type resistor designed to provide high precision and temperate stability in a through-hole format. The resistor is made with a metal-layer construction which yields excellent linear characteristics and temperature stability. It features an extremely low temperature coefficient of resistance that provides superior accuracy and reliability in high temperature applications.</p><p>The ERG-1SJ120V is ideal for applications where high precision and high temperature stability are required. These applications include power supplies, consumer electronics, telecommunications, automotive electronics, and industrial electronic equipment. This resistor is also well-suited for use in high power applications such as motor controllers and inverters due to its superior temperature stability and high current capacity.</p><p>The ERG-1SJ120V works in a similar way to a regular through hole resistor. When a current passes through the resistor, a voltage drop is experienced proportional to the amount of resistance the resistor is intended to present. This voltage drop can be calculated using Ohm\'s Law, which states that the resistance of a material is equal to the voltage across it divided by the current flowing through it. As the temperature of the resistor increases, the resistance decreases, thus allowing more current to flow through the resistor.</p><p>The ERG-1SJ 120V resistor\'s advantage over a regular through hole resistor is that its resistance decreases gradually with increase in temperature as opposed to instantaneously and which gives the circuit better temperature stability. In addition, it also features a very low temperature coefficient of resistance (TCR) and high current capacity. The low TCR of 0.05 %/°C means that the relative changes in resistance due to temperature are small over the specified temperature range.</p><p>The ERG-1SJ120V offers superior performance in high temperature applications. Its metal-layer construction and low TCR ensure excellent linear characteristics and temperature stability, while its high current capacity makes it suitable for use in high power applications.</p>

The specific data is subject to PDF, and the above content is for reference