| Allicdata Part #: | P33W-2BK-ND |
| Manufacturer Part#: |
ERG-2SJ330 |
| Price: | $ 0.18 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES 33 OHM 2W 5% AXIAL |
| More Detail: | 33 Ohms ±5% 2W Through Hole Resistor Axial Flame P... |
| DataSheet: |  ERG-2SJ330 Datasheet/PDF |
| Quantity: | 4043 |
| 1 +: | $ 0.16200 |
| 10 +: | $ 0.13545 |
| 25 +: | $ 0.09864 |
| 50 +: | $ 0.07155 |
| 100 +: | $ 0.05301 |
| 250 +: | $ 0.04070 |
| 500 +: | $ 0.03206 |
| 1000 +: | $ 0.02219 |
| 5000 +: | $ 0.01850 |
| Series: | ERG |
| Packaging: | Bulk |
| Part Status: | Active |
| Resistance: | 33 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 2W |
| Composition: | Metal Oxide Film |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | ±350ppm/°C |
| Operating Temperature: | -55°C ~ 235°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are electrical components designed to provide resistance to electric signals. The ERG-2SJ330 is a common type of Through Hole Resistor, which can be used for a variety of different applications. It is a radial lead resistor composed of two copper wires with a glass-fibre reinforced epoxy-resin body and silicone coating. The resistor has maximum power rating of 0.25W, and an operating temperature range of up to 150°C.
The ERG-2SJ330 offers several advantages over other types of resistors. It is a very small size and can be easily mounted on a PCB, as well as being lightweight and cost-effective. It is also capable of providing stable resistance values over a wide range of temperatures. As its outer coating is made of silicone, the resistor is also highly resistant to water. This makes it especially useful in applications which require the resistor to be installed in areas which may be subject to moisture or humidity.
The ERG-2SJ330 is primarily used in electronic circuits for controlling current and limiting voltage. It is often used in power supplies and digital circuits to restrict the amount of current flowing through the circuit and regulate the voltage. It is also used in line circuits to protect the component from surges, and to reduce signal noise. The resistor can also be used in low-frequency and high-frequency filters, as it is capable of operating even at very high frequencies.
The ERG-2SJ330 works by providing a specific amount of resistance to electric signals. It is composed of two thin copper wires wrapped around a glass-fibre reinforced epoxy-resin body, and covered with a silicone coating. When the resistor is connected to a circuit, the wires act as the resistor, providing resistance to electric signals passing through the resistor. The amount of resistance depends on the number of turns in the copper wire, as well as the size and type of the resistor. By adjusting the number of turns in the copper wire, the resistor can be set to have a specific resistance value.
The ERG-2SJ330 is an important component in a variety of electronic circuits. It provides reliable operation at high temperatures and is highly resistant to water. It is also lightweight and cost-effective, making it a popular choice for a variety of applications. With its ability to provide reliable and stable resistance, the ERG-2SJ330 is an integral part of many electronic systems.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...