ERG-2SJ330A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electronic components used to restrict current or voltage flow inside an electric circuit. One common type of through hole resistor is the ERG-2SJ 330A, which are of the carbon film type, housed in a black epoxy clad cylindrical package with a metal foil strip spirally wound around its core. Besides its resistor function, the ERG-2SJ 330A also acts as a heat sink and radiation shield to dissipate heat and enhance resistance performance in high-frequency and high-voltage circuits. Moreover, the ERG-2SJ 330A exceeds the maximum rated current output set by the Joint Electron Device Engineering Council (JEDEC).

The application field of the ERG-2SJ 330A is wide, ranging from audio equipment and microprocessors to power supply circuits, radio modules, digital clocks, etc. The ERG-2SJ 330A is highly reliable and stable, giving superior voltage-stability at high temperatures and pin current measurements. The minimum load impedance of the resistor can reach 25Ω, which can be increased to 500Ω, depending on the circuit and application. The resistor’s temperature range of -55°C to +125°C makes it suitable for a variety of applications.

The working principle of an ERG-2SJ 330A is fairly simple. The resistor is composed of a carbon film wound around its inner core which varies the resistance along its length. This causes the current to decrease in proportion to the increase in resistance. The resistor’s power rating is given in Watts, and this determines the amount of heat that the resistor can dissipate. An increase or decrease in temperature affects the resistor’s electrical properties, which in turn causes the current to vary.

For a better understanding of the working principle of the ERG-2SJ 330A, consider a sinusoidal voltage waveform applied to a resistor connected with a load. The current passing through the resistor would follow the waveform, and the voltage drop across the resistor would be determined by the ratio of the current and the resistance value. In other words, the voltage drops when the current increases and vice versa.

The ERG-2SJ 330A is manufactured to maintain a very tight tolerance of ±10%. This allows for very accurate and reproducible results, as well as allowing the resistor to be used in a wide range of applications. One such application is in audio circuits, where the ERG-2SJ 330A is used to provide gain control and adjust the signal level being sent to the speakers. This ensures that the sound level is maintained, even as the input voltage changes.

In conclusion, the ERG-2SJ 330A through hole resistor is an extremely reliable component which exhibits superior voltage and temperature stability. It can be used in a wide variety of applications, such as audio amplifiers, digital clocks, radio modules, and power supply circuits. Its tight tolerance rating allows for very accurate results and makes it an essential component for any project.

The specific data is subject to PDF, and the above content is for reference